GB/T 39248-2020 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification (English Version)
This standard specifies the requirements for two types of thermoplastic multilayer (non-vulcanized) hoses and hose assemblies for transporting liquefied petroleum gas and liquefied natural gas. Each type is divided into two categories, one is used onshore, and the other is used offshore: ——Type A is used onshore; ——Type B is used offshore. This standard applies to hoses and hose assemblies with an inner diameter of 25mm~300mm, working pressure of 1.05MPa~2.5MPa and working temperature range of -196℃~non-vulcanized). Thermoplastic multilayers at +4 5 °C (Note: Offshore LNG hose assemblies are also specified in EN 1472 2.
GB/T 39248-2020 Referenced Document
GB/T 24134-2009 Rubber and plastics hoses.Assessment of ozone resistance under static conditions
GB/T 39248-2020 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification
GB/T 5563-2013 Rubber and plastics hoses and hose assemblies.Hydrostatic testing
GB/T 9572-2013 Rubber and plastics hoses and hose assemblies.Determination of electrical resistance and conductivity
ISO 10431 Petroleum and natural gas industries; pumping units; specification
ISO 10619-2 Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures*, 2021-05-31 Update
ISO 13934-1 Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method
ISO 4671 Rubber and plastics hoses and hose assemblies — Methods of measurement of the dimensions of hoses and the lengths of hose assemblies*, 2022-03-21 Update
GB/T 39248-2020 history
2020GB/T 39248-2020 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals—Specification