IEEE C37.60-2003
Standard Requirements for Overhead@ Pad-Mounted@ Dry Vault@ and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV

Standard No.

IEEE C37.60-2003

Release Date

2003

Published By

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

Status

Be replaced 2013-01

Replace By

IEEE C37.60-2012

Latest

IEEE C37.60-2019

Scope

This standard applies to all overhead@ pad-mounted@ dry vault@ and submersible single- or multipole alternating current automatic circuit reclosers and fault interrupters for rated maximum voltages above 1000V and up to 38 kV.In order to simplify this standard where possible@ the term recloser/FI (reclosers/FIs) has been substituted for automatic circuit recloser or fault interrupter or both.NOTE??When reclosers are applied in a substation@ special considerations may apply@ see 6.5.1.5.3.

IEEE C37.60-2003 history

• 2019 IEEE C37.60-2019 High-voltage switchgear and controlgear – Part 111: Automatic circuit reclosers for alternating current systems up to and including 38 kV
• 2012 IEEE C37.60-2012 High-voltage switchgear and controlgear – Part 111: Automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV
• 2003 IEEE C37.60-2003 Standard Requirements for Overhead@ Pad-Mounted@ Dry Vault@ and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV
• 1981 IEEE C37.60-1981 Standard Requirements for Overhead@ Pad Mounted@ Dry Vault@ and Submersible Automatic Circuit Reclosers and Fault Interrupters for AC Systems