1.1 This specification covers the design, construction, and weatherability of structural standing seam steel roof panel systems. It includes performance requirements for the following elements only: panels, concealed panel clips, panel/clip anchorage, and panel joint sealers. NOTE 1—These systems are used on both low-slope and steep-slope roof applications. They also are used with or without an underlying deck or sheathing.
1.2 The objective of this specification is to provide for the overall performance of the structural standing seam steel roof panel system as defined in
3.2.6 during its service life in order to provide weather protection, carry the specified design loads, and allow proper access over the roof surface in order to provide for periodic maintenance of equipment by the owner.
1.3 In addition to structural, the specifier shall evaluate other characteristics beyond the scope of this specification that affect the final choice of roof construction. These include, but are not limited to, functional, legal, insurance, and economic considerations. See Appendix X1 for specifier’s checklist.
1.4 The specification is not intended to exclude products or systems not covered by the referenced documents.
1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.6 The text of this specification contains notes and footnotes that provide explanatory information and are not requirements of this specification.
1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E1514-98(2017)e1 Referenced Document
ASTM A463/A463M Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process*, 2022-11-01 Update
ASTM A653/A653M Standard Specification for Steel Sheet, Zinc-Coated (Galvinized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
ASTM A792/A792M Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
ASTM A875/A875M Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process
ASTM C711 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
ASTM C765 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
ASTM C879 Standard Test Methods for Release Papers Used With Preformed Tape Sealants
ASTM D1667 Standard Specification for Flexible Cellular Materials-Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam)
ASTM D3310 Standard Test Method for Determining Corrosivity of Adhesive Materials*, 2023-01-01 Update
ASTM E1592 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
ASTM E1646 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference*, 2018-11-01 Update
ASTM E1680 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
ASTM E631 Standard Terminology of Building Constructions
ASTM G21 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM E1514-98(2017)e1 history
2023ASTM E1514-98(2023)e1 Standard Specification for Structural Standing Seam Steel Roof Panel Systems
2017ASTM E1514-98(2017)e1 Standard Specification for Structural Standing Seam Steel Roof Panel Systems
1998ASTM E1514-98(2011) Standard Specification for Structural Standing Seam Steel Roof Panel Systems
1998ASTM E1514-98(2003) Standard Specification for Structural Standing Seam Steel Roof Panel Systems
1998ASTM E1514-98 Standard Specification for Structural Standing Seam Steel Roof Panel Systems