ASTM C1528/C1528M-20
Standard Guide for Selection of Dimension Stone
Home
ASTM C1528/C1528M-20
Standard No.
ASTM C1528/C1528M-20
Release Date
2020
Published By
American Society for Testing and Materials (ASTM)
Latest
ASTM C1528/C1528M-20
Scope
1.1 This guide is intended to be used by architects, engineers, specifiers, contractors, and material suppliers who design, select, specify, install, purchase, fabricate, or supply natural stone products for construction applications. 1.2 Consensus Standard—This guide is an industry consensus standard drafted in a cooperative effort among engineers, architects, geologists, producers, and installers of natural stone. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be 1 This guide is under the jurisdiction of ASTM Committee C18 on Dimension Stone and is the direct responsibility of Subcommittee C18.08 on Selection of Dimension Stone. Current edition approved April 1, 2020. Published May 2020. Originally approved in 2002. Last previous edition approved in 2018 as C1528–18. DOI: 10.1520/C1528_C1528M-20. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. used independently of the other, and values from the two systems shall not be combined. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C1528/C1528M-20 Referenced Document
ASTM C119
Standard Terminology Relating to Dimension Stone
*
,
2023-06-01 Update
ASTM C120
Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
*
,
2024-04-22 Update
ASTM C1201
Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
ASTM C121/C121M
Standard Test Method for Water Absorption of Slate
*
,
2020-05-15 Update
ASTM C1242
Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
*
,
2023-11-15 Update
ASTM C1352
Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
ASTM C1353
Standard Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
ASTM C1354
Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone
ASTM C1526
Standard Specification for Serpentine Dimension Stone
*
,
2023-10-01 Update
ASTM C1527
Standard Specification for Travertine Dimension Stone
*
,
2024-04-22 Update
ASTM C170
Standard Test Method for Compressive Strength of Dimension Stone
ASTM C1721
Standard Guide for Petrographic Examination of Dimension Stone
*
,
2022-04-15 Update
ASTM C217
Standard Test Method for Weather Resistance of Slate
ASTM C241
Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
ASTM C295
Standard Guide for Petrographic Examination of Aggregates for Concrete
ASTM C406
Standard Specification for Roofing Slate
*
,
2024-04-22 Update
ASTM C503
Standard Specification for Marble Dimension Stone (Exterior)
ASTM C568
Standard Specification for Limestone Dimension Stone
ASTM C615
Standard Specification for Granite Dimension Stone
ASTM C616
Standard Specification for Quartz-Based Dimension Stone
ASTM C629
Standard Specification for Slate Dimension Stone
ASTM C856
Standard Practice for Petrographic Examination of Hardened Concrete
ASTM C880
Standard Test Method for Flexural Strength of Dimension Stone
ASTM C97
Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
ASTM C99
Standard Test Method for Modulus of Rupture of Dimension Stone
ASTM D2203
Standard Test Method for Staining from Sealants
ASTM C1528/C1528M-20 history
2020
ASTM C1528/C1528M-20
Standard Guide for Selection of Dimension Stone
2018
ASTM C1528/C1528M-18
Standard Guide for Selection of Dimension Stone
2017
ASTM C1528/C1528M-17a
Standard Guide for Selection of Dimension Stone
2017
ASTM C1528/C1528M-17
Standard Guide for Selection of Dimension Stone
2015
ASTM C1528-15
Standard Guide for Selection of Dimension Stone
2013
ASTM C1528-13
Standard Guide for Selection of Dimension Stone
2012
ASTM C1528-12b
Standard Guide for Selection of Dimension Stone
2012
ASTM C1528-12a
Standard Guide for Selection of Dimension Stone
2012
ASTM C1528-12
Standard Guide for Selection of Dimension Stone
2010
ASTM C1528-10
Standard Guide for Selection of Dimension Stone
2009
ASTM C1528-09a
Standard Guide for Selection of Dimension Stone for Exterior Use
2009
ASTM C1528-09
Standard Guide for Selection of Dimension Stone for Exterior Use
2008
ASTM C1528-08
Standard Guide for Selection of Dimension Stone for Exterior Use
2002
ASTM C1528-02
Standard Guide for Selection of Dimension Stone for Exterior Use
Copyright ©2024 All Rights Reserved