PREN 12697-40-2018
Bituminous mixtures - Test methods - Part 40: In situ drainability

Standard No.
PREN 12697-40-2018
Release Date
2018
Published By
CEN - European Committee for Standardization
Latest
PREN 12697-40-2018
Scope
This document describes a method to determine the in situ relative hydraulic conductivity@ at specific locations@ of a road surfacing that is designed to be permeable. An estimate of the average value for the surfacing is obtained from the mean value of a number of determinations on each section of road. The test measures the ability to drain water (drainability) achieved in situ of a surfacing. As such@ it can be used as a compliance check to ensure that a permeable surface course has the required properties when it is laid. The test can also be used subsequently to establish the change of drainage ability with time. For the test to be valid@ the surface of the test area should be clean and free from detritus. Measurements can be made when a road is either wet or dry@ but not if it is in a frozen state.

PREN 12697-40-2018 history

  • 2018 PREN 12697-40-2018 Bituminous mixtures - Test methods - Part 40: In situ drainability

PREN 12697-40-2018 -All Parts

PREN 12697-1-2018 Bituminous mixtures - Test methods - Part 1: Soluble binder content PREN 12697-11-2018 Bituminous mixtures - Test methods - Part 11: Determination of the affinity between aggregate and bitumen PREN 12697-14-2018 Bituminous mixtures - Test methods - Part 14: Water content PREN 12697-19-2018 Bituminous mixtures - Test methods - Part 19: Permeability of specimen PREN 12697-20-2018 Bituminous mixtures - Test methods - Part 20: Indentation using cube or Marshall specimens PREN 12697-21-2018 Bituminous mixtures - Test methods - Part 21: Indentation using plate specimens PREN 12697-22-2018 Bituminous mixtures - Test methods - Part 22: Wheel tracking PREN 12697-28-2018 Bituminous mixtures - Test methods - Part 28: Preparation of samples for determining binder content@ water content and grading PREN 12697-29-2018 Bituminous mixtures - Test methods - Part 29: Determination of the dimensions of a bituminous specimen PREN 12697-30-2017 Bituminous mixtures - Test methods for hot mix asphalt - Part 30: Specimen preparation by impact compactor PREN 12697-31-2014 Bituminous mixtures - Test methods - Part 31: Specimen preparation by gyratory compactor PREN 12697-32-2017 Bituminous mixtures - Test methods - Part 32: Laboratory compaction of bituminous mixtures by vibratory compactor PREN 12697-33-2017 Bituminous mixtures - Test methods - Part 33: Specimen prepared by roller compactor PREN 12697-34-2018 Bituminous mixtures - Test methods - Part 34: Marshall test prEN 12697-36-2020 Bituminous mixtures - Test methods - Part 36: Determination of the thickness of bituminous pavement prEN 12697-37-2020 Bituminous mixtures - Test methods - Part 37: Hot sand test for the adhesivity of binder on pre-coated chippings for Hot-Rolled-Asphalt (HRA) prEN 12697-38-2020 Bituminous mixtures - Test methods - Part 38: Common equipment and calibration PREN 12697-39-2018 Bituminous mixtures - Test methods - Part 39: Binder content by ignition prEN 12697-41-2020 Bituminous mixtures - Test methods - Part 41: Resistance to de-icing fluids prEN 12697-43-2021 Bituminous mixtures - Test methods - Part 43: Resistance to fuel PREN 12697-44-2017 Bituminous mixtures - Test methods for hot mix asphalt - Part 44: Crack propagation by semi-circular bending test PREN 12697-45-2018 Bituminous mixtures - Test methods - Part 45: Saturation Ageing Tensile Stiffness (SATS) conditioning test PREN 12697-46-2018 Bituminous mixtures - Test methods - Part 46: Low temperature cracking and properties by uniaxial tension tests prEN 12697-47-2021 Bituminous mixtures - Test methods - Part 47: Determination of the ash content of natural asphalts PREN 12697-48-2013 Bituminous mixtures - Test methods for hot mix asphalt - Part 48: Interlayer Bonding PREN 12697-52-2015 Bituminous mixtures - Test methods - Part 52: Conditioning to address oxidative ageing PREN 12697-53-2018 Bituminous mixtures - Test methods - Part 53: Cohesion increase by spreadability-meter method PREN 12697-54-2018 Bituminous mixtures - Test methods - Part 54: Curing of specimen for test of mixtures with bitumen emulsion PREN 12697-55-2018 Bituminous mixtures - Test methods - Part 55: Organoleptic assessment of compatibility of constituent materials of a mixture with bitumen emulsion PREN 12697-56-2018 Bituminous mixtures - Test methods - Part 56: Specimen preparation by static compaction PREN 12697-6-2018 Bituminous mixtures - Test methods - Part 6: Determination of bulk density of bituminous specimens



Copyright ©2024 All Rights Reserved