1.1 This fire-test-response test method covers the determination under specified laboratory conditions of combustion characteristics of building materials.
1.2 Limitations of this fire-test response test method are shown below.
1.2.1 This test method does not apply to laminated or coated materials.
1.2.2 This test method is not suitable or satisfactory for materials that soften, flow, melt, intumesce or otherwise separate from the measuring thermocouple.
1.2.3 This test method does not provide a measure of an intrinsic property.
1.2.4 This test method does not provide a quantitative measure of heat generation or combustibility; it simply serves as a test method with selected (end point) measures of combustibility.
1.2.5 The test method does not measure the self-heating tendencies of materials.
1.2.6 In this test method materials are not being tested in the nature and form used in building applications. The test specimen consists of a small, specified volume that is either (1) cut from a thick sheet; (2) assembled from multiple thicknesses of thin sheets; or (3) placed in a container if composed of granular powder or loose-fiber materials.
1.2.7 Results from this test method apply to the specific test apparatus and test conditions and are likely to vary when changes are made to one or more of the following: (1) the size, shape, and arrangement of the specimen; (2) the distribution of organic content; (3) the exposure temperature; (4) the air supply; (5) the location of thermocouples.
1.3 This test method includes two options, both of which use a furnace to expose test specimens of building materials to a temperature of 750°C (1382°F).
1.3.1 The furnace for the apparatus for Option A consists of a ceramic tube containing an electric heating coil, and two concentric vertical refractory tubes.
1.3.2 The furnace for the apparatus for Option B (Test Method E2652) consists of an enclosed refractory tube surrounded by a heating coil with a cone-shaped airflow stabilizer.
1.4 This test method references notes and footnotes that provide explanatory information. These notes and footnotes, excluding those in tables and figures, shall not be considered as requirements of this test method.
1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.6 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire-hazard or fire-risk assessment of the materials, products, or assemblies under actual fire conditions.
1.7 Fire testing is inherently hazardous. Adequate safeguards for personnel and property shall be employed in conducting these tests.
1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM E136-16a Referenced Document
ASTM D1929 Standard Test Method for Determining Ignition Temperature of Plastics
ASTM D3174 Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal*, 2018-10-15 Update
ASTM E2652 Standard Test Method for Assessing Combustibility of Materials Using a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750 °C*, 2022-11-01 Update
ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials
ISO 1182 Reaction to fire tests for products — Non-combustibility test*, 2020-06-04 Update
ISO 13943 Fire safety — Vocabulary*, 2023-09-01 Update
ASTM E136-16a history
2024ASTM E136-24a Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C
2024ASTM E136-24 Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C
2022ASTM E136-22 Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C
0000 ASTM E136-20
2019ASTM E136-19a Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750°C
2019ASTM E136-19 Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750°C
2016ASTM E136-16a Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
2016ASTM E136-16 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750&xb0;C
2012ASTM E136-12 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750deg;C
2011ASTM E136-11 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750&176;C
2009ASTM E136-09b Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750176;C
2009ASTM E136-09a Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750176;C
2009ASTM E136-09 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750176;C
2004ASTM E136-04 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750176;C
1999ASTM E136-99e1 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750oC