ASTM A979/A979M-03(2019)
Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field

Standard No.

ASTM A979/A979M-03(2019)

Release Date

2019

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM A979/A979M-03(2019)

Scope

1.1 This specification covers the minimum material requirements and describes the procedures for installing concrete pavements and linings in corrugated steel pipes and structural plate structures in the field. Specific designs with additional or greater requirements shall be detailed in the contract documents. This specification is applicable to paving or lining new pipes and for rehabilitating existing structures. The pipe to be paved or lined is described in Specifications A760/A760M, A761/A761M, and A762/A762M. 1.2 This specification covers pipes 48 in. [1200 mm] and larger for pavements and 24 in. [600 mm] and larger for full linings. 1.3 New pipes are to be designed in accordance with Practice A796/A796M and installed in accordance with Practice A798/A798M for factory-made pipes and Practice A807/ A807M for structural plate structures. Structures to be rehabilitated shall be structurally stable. 1.4 Pipes with plant installed concrete pavements and linings are covered under Specification A849. 1.5 This specification is applicable to product in either inch/pound units as A979 or in SI units as A979M. Inch/pound units and SI units are not necessarily equivalent. SI units are shown in brackets in the text for clarity, but they are the applicable values when materials are ordered to A979M. 1.6 This standard may involve hazardous materials, operations and equipment. The standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM A979/A979M-03(2019) Referenced Document

• ASTM A1064/A1064M Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete*， 2022-11-01 Update
• ASTM A615/A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement*， 2022-07-01 Update
• ASTM A760/A760M Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains*， 2020-05-01 Update
• ASTM A761/A761M Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
• ASTM A762/A762M Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
• ASTM A796/A796M Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications*， 2021-03-01 Update
• ASTM A798/A798M Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
• ASTM A807/A807M Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
• ASTM A849 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe*， 2024-04-22 Update
• ASTM A902 Standard Terminology Relating to Metallic Coated Steel Products
• ASTM C150 Standard Specification for Portland Cement
• ASTM C309 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
• ASTM C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field*， 2024-04-01 Update
• ASTM C33 Standard Specification for Concrete Aggregates
• ASTM C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
• ASTM C595 Standard Specification for Blended Hydraulic Cements
• ASTM C618 Standard Specification for Fly Ash And Raw Or Calcined Natural Pozzolan For Use As A Mineral Admixture In Portland Cement Concrete
• ASTM D6690 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements*， 2021-05-01 Update

ASTM A979/A979M-03(2019) history

• 2019 ASTM A979/A979M-03(2019) Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
• 2003 ASTM A979/A979M-03(2014)e1 Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
• 2003 ASTM A979/A979M-03(2009) Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
• 2003 ASTM A979/A979M-03 Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
• 1997 ASTM A979/A979M-97 Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field