ASTM D1711-22
Standard Terminology Relating to Electrical Insulation

Standard No.

ASTM D1711-22

Release Date

2022

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM D1711-24

Latest

ASTM D1711-24

Scope

1.1 This terminology standard is a compilation of technical terms associated with testing and specifying solid electrical and electronic insulating materials. 1.2 This terminology standard shall contain all definitions that are balloted specifically through Subcommittee D09.94 and through D09 main committee and that are of general interest to standards associated with electrical and electronic insulating materials. Those definitions shall be of importance to electrical and electronic insulating materials issues but need not be directly associated with a specific standard under the jurisdiction of Committee D09 on Electrical and Electronic Insulating Materials. 1.3 It is intended that all definitions in this terminology standard originating in a specific standard under the jurisdiction of Committee D09 be identical to definitions of the same terms as printed in standards of originating technical subcommittees, with the exceptions of: (1) deletion of any part of the Discussion included in another standard that refers specifically to the use of a term in that standard; (2) figure numbers and corresponding references; and (3) in this terminology standard, a parenthetical addition of a reference to one or more technical standards in which the term is used and the year in which the term was added to this compilation. 1.3.1 Definitions contained in this terminology standard which did not originate in a specific standard under the jurisdiction of Committee D09, or which originated in a standard that has since been revised or withdrawn, and that have been appropriately balloted, shall also be included in this terminology standard. 1.4 It is permissible to include symbols as part of the representation of terms, where appropriate. 1.5 It is not intended that this terminology standard include symbols (except as noted in 1.4). It is also permissible to include acronyms and abbreviations referring directly to defined terms. 1.6 Revisions and additions to those definitions in this terminology standard which originate in a specific standard under the jurisdiction of Committee D09 are to be made as a product of a collaborative effort between Subcommittee D09.94 and the corresponding technical subcommittee of Committee D09, with Subcommittee D09.94 providing editorial advice to the technical subcommittees. 1.7 Each definition in this terminology standard shall be accompanied by the year in which it was first incorporated into the standard, placed at the end in parentheses. All discussions shall also carry a date; it is possible that the discussion date is different from the definition date. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D1711-22 Referenced Document

• ASTM D1000 Standard Test Method for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
• ASTM D115 Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation
• ASTM D149 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
• ASTM D150 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
• ASTM D1676 Standard Test Methods for Film-Insulated Magnet Wire
• ASTM D176 Standard Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation
• ASTM D1830 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
• ASTM D1868 Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
• ASTM D202 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
• ASTM D2303 Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
• ASTM D2304 Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials
• ASTM D2307 Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
• ASTM D2519 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
• ASTM D257 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
• ASTM D2671 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use*， 2024-04-22 Update
• ASTM D2967 Standard Test Method for Edge Coverage of Coating Powders
• ASTM D3032 Standard Test Methods for Hookup Wire Insulation
• ASTM D3056 Standard Test Method for Gel Time of Solventless Varnishes*， 2023-10-01 Update
• ASTM D3145 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
• ASTM D3214 Standard Test Methods for Coating Powders and Their Coatings Used for Electrical Insulation
• ASTM D3288 Standard Test Methods for Magnet-Wire Enamels
• ASTM D3312 Standard Test Method for Percent Reactive Monomer in Solventless Varnishes
• ASTM D3353 Standard Test Methods for Fibrous-Insulated Magnet Wire
• ASTM D3382 Standard Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques
• ASTM D3426 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
• ASTM D3636 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
• ASTM D3755 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
• ASTM D4313 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CM) Jackets For Wire and Cable
• ASTM D4323 Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance
• ASTM D4470 Standard Test Method for Static Electrification
• ASTM D4496 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
• ASTM D470 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
• ASTM D4733 Standard Test Methods for Solventless Electrical Insulating Varnishes
• ASTM D4880 Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire
• ASTM D4881 Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire
• ASTM D4882 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test
• ASTM D5288 Standard Test Method for Determining the Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)
• ASTM D6053 Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes

ASTM D1711-22 history

• 2024 ASTM D1711-24 Standard Terminology Relating to Electrical Insulation
• 2022 ASTM D1711-22 Standard Terminology Relating to Electrical Insulation
• 2020 ASTM D1711-20 Standard Terminology Relating to Electrical Insulation
• 2015 ASTM D1711-15 Standard Terminology Relating to Electrical Insulation
• 2014 ASTM D1711-14a Standard Terminology Relating to Electrical Insulation
• 2014 ASTM D1711-14 Standard Terminology Relating to Electrical Insulation
• 2013 ASTM D1711-13 Standard Terminology Relating to Electrical Insulation
• 2011 ASTM D1711-11a Standard Terminology Relating to Electrical Insulation
• 2011 ASTM D1711-11 Standard Terminology Relating to Electrical Insulation
• 2008 ASTM D1711-08 Standard Terminology Relating to Electrical Insulation
• 2002 ASTM D1711-02 Standard Terminology Relating to Electrical Insulation
• 1999 ASTM D1711-99 Standard Terminology Relating to Electrical Insulation