1.1 This practice includes procedures for preparing compacted asphalt mixture specimens, exposing the specimens to hydrostatic pore pressure inside an enclosed chamber, and guidance on testing the specimens for the effect of water on the tensile strength or change in other properties of the asphalt mixture, such as density, modulus, etc.
1.2 Specimens conditioned according to this practice can be tested using methods and test procedures referenced in this document, and those results may provide information as to the effect of the moisture conditioning of this practice on the moisture sensitivity of those mixtures.
1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D7870/D7870M-20 Referenced Document
ASTM D1561/D1561M Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor*, 2024-04-22 Update
ASTM D2726/D2726M Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures*, 2024-04-22 Update
ASTM D3665 Standard Practice for Random Sampling of Construction Materials
ASTM D3666 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials*, 2024-04-22 Update
ASTM D4013 Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor
ASTM D4867/D4867M Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
ASTM D5361/D5361M Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing*, 2022-12-15 Update
ASTM D6752/D6752M Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method*, 2023-11-01 Update
ASTM D6925 Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor*, 2023-12-01 Update
ASTM D6926 Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
ASTM D6927 Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures*, 2022-11-01 Update
ASTM D6931 Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures
ASTM D8 Standard Terminology Relating to Materials for Roads and Pavements
ASTM D979/D979M Standard Practice for Sampling Asphalt Mixtures*, 2022-11-01 Update
ASTM D7870/D7870M-20 history
2020ASTM D7870/D7870M-20 Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure
2013ASTM D7870/D7870M-13 Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure