Full Description 1.1 This specification specifies the required properties at the time and place of custody transfer for petroleum fuels for marine use in diesel engines and boilers. It is for the guidance of interested parties such as marine equipment designers, and suppliers and purchasers of marine fuels. 1.2 This specification excludes marine fuels intended for gas turbine use. Gas turbine fuels for non-aviation use are covered by Specification D2880 (or equivalent ISO 4261). 1.3 This specification does not imply the availability of all categories of fuel at all ports. 1.4 This specification shall not preclude observance of national or local regulations that may be more restrictive. Note 1-This specification takes into account the international requirements for flash point as stated in the International Maritime Organization (IMO) Convention for Safety of Life at Sea (SOLAS) 1974, Amendment 1, Chapter II-2, Regulation 15. 1.5 The values stated in SI units are to be regarded as standard. The values stated in inch-pound units are for information only. 1.6 The following precautionary statement pertains to the test method portion only, Section 6, of this specification. This standard does not purport to address the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.>
ASTM D2069-91(1998) Referenced Document
ASTM D1250 Standard Guide for Petroleum Measurement Tables
ASTM D1298 Standard Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method*, 1999-04-22 Update
ASTM D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products
ASTM D2500 Standard Test Method for Cloud Point of Petroleum Products*, 1999-04-22 Update
ASTM D2880 Standard Specification for Gas Turbine Fuel Oils*, 1998-04-22 Update
ASTM D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D4176 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
ASTM D4294 Standard Test Method for Sulfur in Petroleum Products by Energy-Dispersive X-Ray Fluorescence Spectroscopy*, 1998-04-22 Update
ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
ASTM D473 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method
ASTM D482 Standard Test Method for Ash from Petroleum Products*, 2019-11-01 Update
ASTM D4868 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
ASTM D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products
ASTM D613 Standard Test Method for Cetane Number of Diesel Fuel Oil
ASTM D93 Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester
ASTM D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation*, 1999-04-22 Update
ASTM D97 Standard Test Method for Pour Point of Petroleum Products
ISO 2719 Determination of flash point — Pensky-Martens closed cup method — Amendment 1: Thermometers correction*, 2021-03-15 Update
ISO 3015 Petroleum and related products from natural or synthetic sources — Determination of cloud point*, 2019-04-25 Update
ISO 3016 Petroleum and related products from natural or synthetic sources — Determination of pour point*, 2019-04-25 Update
ISO 3104 Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity*, 2023-10-01 Update
ISO 3170 Petroleum liquids - Manual sampling*, 2004-02-01 Update
ISO 3675 Crude petroleum and liquid petroleum products — Laboratory determination of density — Hydrometer method — Amendment 1
ISO 3733 Petroleum products and bituminous materials - Determination of water - Distillation method*, 1999-09-01 Update
ISO 3735 Crude petroleum and fuel oils - Determination of sediment - Extraction method*, 1999-03-01 Update
ISO 4261 Petroleum products.Fuels (class F).Specifications of gas turbine fuels for industrial and marine applications*, 2013-09-01 Update
ISO 4262 Petroleum products; determination of carbon residue; Ramsbottom method
ISO 5165 Petroleum products — Determination of the ignition quality of diesel fuels — Cetane engine method*, 2020-07-13 Update
ISO 6245 Petroleum products - Determination of ash*, 2001-10-01 Update
ISO 6615 Petroleum products; determination of carbon residue; Conradson method
ISO 8216 Petroleum products - Fuels (class F); Classification - Part 99: General*, 2002-06-01 Update
ISO 8217 Petroleum products - Fuels (class F) - Specifications of marine fuels*, 2017-03-01 Update
ISO 8754 Petroleum products - Determination of sulfur content - Energy-dispersive X-ray fluorescence spectrometry*, 2003-07-01 Update
ISO 91-1 Petroleum measurement tables; part 1: tables based on reference temperatures of 15 °C and 60 °F