ISO 21420:2020
Protective gloves — General requirements and test methods

Standard No.
ISO 21420:2020
Release Date
2020
Published By
International Organization for Standardization (ISO)
Status
Replace By
ISO 21420:2020/Amd 1:2022
Latest
ISO 21420:2020/Amd 1:2022
Scope
This document specifies the general requirements and relevant test procedures for glove design and construction, innocuousness, comfort and efficiency, as well as the marking and information supplied by the manufacturer applicable to all protective gloves. It can also apply to arm protectors and gloves permanently incorporated in containment enclosures. Gloves and hand protectors such as mittens, pot holders and arm protection are covered by this document. This document does not address the protective properties of gloves and therefore is not used alone but only in combination with the appropriate specific standard(s). A non-exhaustive list of these standards is given in the Bibliography.

ISO 21420:2020 Referenced Document

  • EN 16350 Protective gloves - Electrostatic properties
  • EN 16778 Protective gloves - The determination of Dimethylformamide in gloves
  • ISO 11092 Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)
  • ISO 14268 Leather — Physical and mechanical tests — Determination of water vapour permeability*2023-01-31 Update
  • ISO 14362-1 Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres
  • ISO 17075-1 Leather — Chemical determination of chromium(VI) content in leather — Part 1: Colorimetric method
  • ISO 17075-2 Leather — Chemical determination of chromium(VI) content in leather — Part 2: Chromatographic method
  • ISO 17234-1 Leather — Chemical tests for the determination of certain azo colourants in dyed leathers — Part 1: Determination of certain aromatic amines derived from azo colourants*2020-08-01 Update
  • ISO 20344:2011 Personal protective equipment - Test methods for footwear
  • ISO 23388 Protective gloves against mechanical risks
  • ISO 3071 Textiles — Determination of pH of aqueous extract
  • ISO 3758 Textiles — Care labelling code using symbols*2023-06-01 Update
  • ISO 4045:2018 Leather — Chemical tests — Determination of pH and difference figure
  • ISO 7000:2014 Graphical symbols for use on equipment - Registered symbols
  • ISO/TS 16190 Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine polycyclic aromatic hydrocarbons (PAH) in footwear materials

ISO 21420:2020 history

Protective gloves — General requirements and test methods



Copyright ©2024 All Rights Reserved