This European Standard specifies the properties of aggregates and filler aggregates obtained by processing natural@ manufactured or recycled materials and mixtures of these aggregates for use in bituminous mixtures and surface treatments for roads@ airfields and other trafficked areas. It covers aggregates having an oven dried particle density greater than 2@00 Mg/m3. It also covers coarse recycled aggregates with particle densities greater than 1@50 Mg/m3 with appropriate caveats and recycled fine aggregate with appropriate caveats (see Annex A). NOTE 1 Requirements for lightweight aggregates are specified in prEN 13055. This European Standard does not cover the use of reclaimed bituminous mixtures (see NOTE 2). A list of the source materials that have been considered and indicating those which are within the scope of this European Standard is given in Annex A (normative). Requirements for the Assessment and Verification of the Constancy of Performance (AVCP) of aggregates to this European Standard are given in prEN 16236. Aggregates used in construction shall conform with all the requirements of the relevant European Standards for aggregates. These standards include comprehensive and specific requirements for natural aggregates@ iron and steel making slag and recycled aggregates@ dealing with@ for example@ the stability of certain basalts@ the expansion of certain slags and the constitution of recycled aggregates. NOTE 2 Requirements for reclaimed asphalt for use as a constituent of asphalt mixtures are specified in prEN 13108-8 and are therefore not covered in detail in this standard. prEN 13108-8 does however call up the general requirements of prEN 13043 for the aggregate component of reclaimed asphalt. NOTE 3 Guidance on selection of appropriate categories for specific applications can be found in national provisions in the place of use of the aggregate.
PREN 13043-2015 history
2015PREN 13043-2015 Aggregates for bituminous mixtures and surface treatments for roads@ airfields and other trafficked areas