International Organization for Standardization (ISO)
Latest
ISO 4898:2018
Scope
This document specifies requirements and methods of testing for three categories of rigid cellular plastics thermal-insulation products for buildings. It covers rigid cellular plastics in the form of flat or profiled boards, with or without natural skins. They can also be faced or laminated with foil, plastic or metal films or sheets, mineral coatings, paper, cardboard or other materials.
This document is not applicable to materials used for the thermal insulation of pipes and vessels, for impact sound absorption or for acoustical insulation.
This document covers the following cellular materials used in the thermal insulation of buildings:
— PF based on phenolic polymer;
— EPS based on expanded polystyrene;
— XPS based on extruded polystyrene;
— PUR based on polyurethane.
The limiting quality values in this document are for use only in the specification of materials between purchaser and supplier, and are not intended to be used for design purposes.
Additional requirements for special applications can be added to those specified in this document by agreement between purchaser and supplier.
ISO 4898:2018 Referenced Document
ISO 1040 Building construction; Modular coordination; Multimodules for horizontal coordinating dimensions
ISO 11561 Ageing of thermal insulation materials - Determination of the long-term change in thermal resistance of closed-cell plastics (accelerated laboratory test methods)
ISO 1209-1 Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test
ISO 12576-1:2001 Thermal insulation - Insulating materials and products for buildings; Conformity control systems - Part 1: Factory-made products
ISO 1663 Rigid cellular plastics — Determination of water vapour transmission properties*, 2023-08-01 Update
ISO 1923 Cellular plastics and rubbers; Determination of linear dimensions
ISO 2796 Cellular plastics, rigid; Test for dimensional stability
ISO 2896 Rigid cellular plastics - Determination of water absorption
ISO 291 Plastics - Standard atmospheres for conditioning and testing
ISO 7616 Cellular plastics, rigid; Determination of compressive creep under specified load and temperature conditions
ISO 7850 Cellular plastics, rigid; Determination of compressive creep
ISO 8301 Thermal insulation — Determination of steady-state thermal resistance and related properties — Heat flow meter apparatus AMENDMENT 1
ISO 8302 Thermal insulation; determination of steady-state thermal resistance and related properties; guarded hot plate apparatus
ISO 844 Rigid cellular plastics - Determination of compression properties*, 2021-02-28 Update
ISO 845 Cellular plastics and rubbers - Determination of apparent density
2000ISO 4898:1984/Amd 4:2000 Cellular plastics - Specification for rigid cellular materials used in the thermal insulation of buildings; Amendment 4
1988ISO 4898:1984/Add 2:1988 Cellular plastics — Specification for rigid cellular materials used in the thermal insulation of buildings — Addendum 2: Labelling and marking of products
1988ISO 4898:1984/Add 1:1988 Cellular plastics — Specification for rigid cellular materials used in the thermal insulation of buildings — Addendum 1: Phenol-formaldehyde cellular plastics (RC/PF)
1984ISO 4898:1984 Cellular plastics; Specification for rigid cellular materials used in the thermal insulation of buildings