ASTM B108/B108M-19
Standard Specification for Aluminum-Alloy Permanent Mold Castings

Standard No.

ASTM B108/B108M-19

Release Date

2019

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM B108/B108M-19

Scope

1.1 This specification2 covers aluminum-alloy permanent mold castings designated as shown in Table 1. 1.2 This specification is for aluminum-alloy permanent mold castings used in general purpose applications. It may not address the mechanical properties, integrity testing, and verification required for highly loaded or safety critical applications. 1.3 Alloy and temper designations are in accordance with ANSI H35.1/H35.1(M). 1.4 Unless the order specifies the “M” specification designation, the material shall be furnished to the inch-pound units. 1.5 For acceptance criteria for inclusion of new aluminum and aluminum alloys and their properties in this specification, see Annex A1 and Annex A2. 1.6 Units—The values stated in either SI units or inchpound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the standard. 1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM B108/B108M-19 Referenced Document

• ASTM B179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
• ASTM B275 Standard Practice for Codification of Certain Nonferrous Metals and Alloys, Cast and Wrought
• ASTM B557 Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
• ASTM B557M Standard Test Methods of Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products [Metric]
• ASTM B660 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
• ASTM B666/B666M Standard Practice for Identification Marking of Aluminum and Magnesium Products
• ASTM B881 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products
• ASTM B917/B917M Standard Practice for Heat Treatment of Aluminum-Alloy Castings From All Processes*， 2020-11-01 Update
• ASTM B985 Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis*， 2024-04-22 Update
• ASTM D3951 Standard Practice for Commercial Packaging
• ASTM E1251 Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Argon Atmosphere, Point-to-Plane, Unipolar Self-Initiating Capacitor Discharge
• ASTM E155 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings*， 2020-06-01 Update
• ASTM E165/E165M Standard Practice for Liquid Penetrant Testing for General Industry
• ASTM E2422 Standard Digital Reference Images for Inspection of Aluminum Castings*， 2022-12-01 Update
• ASTM E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
• ASTM E34 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
• ASTM E607 Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique, Nitrogen Atmosphere
• ASTM E716 Standard Practices for Sampling Aluminum and Aluminum Alloys for Spectrochemical Analysis
• ASTM E94/E94M Standard Guide for Radiographic Examination Using Industrial Radiographic Film*， 2022-12-01 Update
• IEEE/ASTM SI 10 American National Standard for Metric Practice
• SAE AMS2771 HEAT TREATMENT OF ALUMINUM ALLOY CASTINGS

ASTM B108/B108M-19 history

• 2019 ASTM B108/B108M-19 Standard Specification for Aluminum-Alloy Permanent Mold Castings
• 2018 ASTM B108/B108M-18e1 Standard Specification for Aluminum-Alloy Permanent Mold Castings
• 2018 ASTM B108/B108M-18 Standard Specification for Aluminum-Alloy Permanent Mold Castings
• 2015 ASTM B108/B108M-15 Standard Specification for Aluminum-Alloy Permanent Mold Castings
• 2014 ASTM B108/B108M-14 Standard Specification for Aluminum-Alloy Permanent Mold Castings
• 2012 ASTM B108/B108M-12e1 Standard Specification for Aluminum-Alloy Permanent Mold Castings
• 2012 ASTM B108/B108M-12 Standard Specification for Aluminum-Alloy Permanent Mold Castings
• 2011 ASTM B108/B108M-11 Standard Specification for Aluminum-Alloy Permanent Mold Castings
• 2008 ASTM B108/B108M-08 Standard Specification for Aluminum-Alloy Permanent Mold Castings
• 2006 ASTM B108-06 Standard Specification for Aluminum-Alloy Permanent Mold Castings
• 2003 ASTM B108-03a Standard Specification for Aluminum-Alloy Permanent Mold Castings
• 2003 ASTM B108-03 Standard Specification for Aluminum-Alloy Permanent Mold Castings
• 2002 ASTM B108-02 Standard Specification for Aluminum-Alloy Permanent Mold Castings
• 2001 ASTM B108-01a Standard Specification for Aluminum-Alloy Permanent Mold Castings
• 2001 ASTM B108-01 Standard Specification for Aluminum-Alloy Permanent Mold Castings
• 1999 ASTM B108-99 Standard Specification for Aluminum-Alloy Permanent Mold Castings