ASTM D1014-18
Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates

Standard No.

ASTM D1014-18

Release Date

2018

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM D1014-18

Scope

1.1 This practice covers procedures to be followed for direct exposure of exterior paints and coatings to the environment when applied to metal surfaces. When originators of a weathering test have the actual exposure conducted by a separate agency, the specific conditions for the exposure of test and control specimens should be clearly defined and mutually agreed upon between all parties. 1.2 Experience indicates that the metal used as a test substrate has a significant effect upon weathering results. The purpose of this practice is to define specific steel and other metal surfaces to be used for testing in order to minimize this source of variability. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parenthesis are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D1014-18 Referenced Document

• ASTM A283/A283M Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates*， 2024-03-01 Update
• ASTM A36/A36M Standard Specification for Carbon Structural Steel
• ASTM B209 Standard Specification for Aluminum and Aluminum- Alloy Sheet and Plate
• ASTM B449 Standard Specification for Chromates on Aluminum*， 2022-10-01 Update
• ASTM D1212 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings*， 2020-06-01 Update
• ASTM D1654 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
• ASTM D1729 Standard Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
• ASTM D1730 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
• ASTM D2200 Standard Pictorial Surface Preparation Standards for Painting Steel Surfaces
• ASTM D2201 Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products
• ASTM D2244 Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
• ASTM D2616 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
• ASTM D2803 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
• ASTM D3359 Standard Test Methods for Measuring Adhesion by Tape Test
• ASTM D4214 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
• ASTM D523 Standard Test Method for Specular Gloss
• ASTM D609 Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products*， 2022-06-01 Update
• ASTM D610 Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces
• ASTM D660 Standard Test Method for Evaluating Degree of Checking of Exterior Paints*， 2019-10-01 Update
• ASTM D661 Standard Test Method for Evaluating Degree of Cracking of Exterior Paints*， 2019-10-01 Update
• ASTM D662 Standard Test Method for Evaluating Degree of Erosion of Exterior Paints*， 2019-10-01 Update
• ASTM D7091 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals*， 2022-06-01 Update
• ASTM D714 Standard Test Method for Evaluating Degree of Blistering of Paints
• ASTM D772 Standard Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints
• ASTM D823 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels
• ASTM E1347 Standard Test Method for Color and Color-Difference Measurement by Tristimulus (Filter) Colorimetry
• ASTM E41 Terminology Relating to Conditioning
• ASTM G113 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
• ASTM G141 Standard Guide for Addressing Variability in Exposure Testing on Nonmetallic Materials
• ASTM G147 Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests
• ASTM G7 Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials

ASTM D1014-18 history

• 2018 ASTM D1014-18 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
• 2009 ASTM D1014-09 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
• 2002 ASTM D1014-02 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
• 1995 ASTM D1014-95 Standard Practice for Conducting Exterior Exposure Tests of Paints on Steel