ISO 7779:2018
Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment

Standard No.

ISO 7779:2018

Release Date

2018

Published By

International Organization for Standardization (ISO)

Latest

ISO 7779:2018

Scope

This document specifies procedures for measuring and reporting the noise emission of information technology and telecommunications equipment. NOTE 1 This document is considered part of a noise test code (see 3.1.2) for this type of equipment and is based on basic noise emission standards (see 3.1.1) ISO 3741, ISO 3744, ISO 3745, ISO 9295 and ISO 11201. The basic emission quantity is the A-weighted sound power level, which can be used for comparing equipment of the same type but from different manufacturers, or for comparing different equipment. Three basic noise emission standards for determination of the sound power levels are specified in this document in order to avoid undue restriction on existing facilities and experience. ISO 3741 specifies comparison measurements in a reverberation test room; ISO 3744 and ISO 3745 specify measurements in an essentially free field over a reflecting plane. Any of these three basic noise emission standards can be selected and used exclusively in accordance with this document when determining sound power levels of a machine. The A-weighted sound power level is supplemented by the A-weighted emission sound pressure level determined at the operator position or the bystander positions, based on basic noise emission standard it can assist in identifying any potential problems that could cause annoyance, activity interference or hearing damage to operators and bystanders. Methods for determination of whether the noise emission includes prominent discrete tones are specified in Annex D. This document is suitable for type tests and provides methods for manufacturers and testing laboratories to obtain comparable results. The methods specified in this document allow the determination of noise emission levels for a functional unit (see 3.1.4) tested individually. The procedures apply to equipment which emits broad-band noise, narrow-band noise and noise which contains discrete-frequency components, or impulsive noise. The sound power and emission sound pressure levels obtained can serve noise emission declaration and comparison purposes (see ISO 9296[3]). NOTE 2 The sound power levels and emission sound pressure levels obtained are not intended to be considered as installation noise immission levels; however, they can be used for installation planning (see ECMA TR/27[11]). If sound power levels obtained are determined for a number of functional units of the same production series, they can be used to determine a statistical value for that production series (see ISO 9296[3]).

ISO 7779:2018 Referenced Document

• IEC 60942 Electroacoustics - Sound calibrators
• IEC 61183 Electroacoustics - Random-incidence and diffuse-field calibration of sound level meters
• IEC 61260-1 IEC 61260-1: Electroacoustics - Octave-band and fractional-octave-band filters - Part 1: Specifications
• IEC 61672-1 Electroacoustics - Sound level meters - Part 1: Specifications
• ISO 11201 Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
• ISO 11203 Acoustics — Noise emitted by machinery and equipment — Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level — Amendment 1*， 2020-03-24 Update
• ISO 3741 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for reverberation test rooms
• ISO 3744 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
• ISO 3745 Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for anechoic rooms and hemi-anechoic rooms — Amendment 1
• ISO 6926 Acoustics — Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels — Amendment 1*， 2020-11-23 Update
• ISO 9295 Acoustics - Determination of high-frequency sound power levels emitted by machinery and equipment

ISO 7779:2018 history

• 2018 ISO 7779:2018 Acoustics — Measurement of airborne noise emitted by information technology and telecommunications equipment
• 2010 ISO 7779:2010 Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment
• 2003 ISO 7779:1999/Amd 1:2003 Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment; Amendment 1: Noise measurement specification for CD/CVD-ROM drives
• 1999 ISO 7779:1999 Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment
• 1988 ISO 7779:1988 Acoustics; measurement of airborne noise emitted by computer and business equipment