ASTM B265-20a
Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

Standard No.

ASTM B265-20a

Release Date

2020

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM B265-20a

Scope

1.1 This specification2 covers annealed titanium and titanium alloy strip, sheet, and plate as follows: 1.1.1 Grade 1—UNS R50250. Unalloyed titanium, 1.1.2 Grade 2—UNS R50400. Unalloyed titanium, 1.1.2.1 Grade 2H—UNS R50400. Unalloyed titanium (Grade 2 with 58 ksi (400 MPa) minimum UTS), 1.1.3 Grade 3—UNS R50550. Unalloyed titanium, 1.1.4 Grade 4—UNS R50700. Unalloyed titanium, 1.1.5 Grade 5—UNS R56400. Titanium alloy (6 % aluminum, 4 % vanadium), 1.1.6 Grade 6—UNS R54520. Titanium alloy (5 % aluminum, 2.5 % tin), 1.1.7 Grade 7—UNS R52400. Unalloyed titanium plus 0.12 to 0.25 % palladium, 1.1.7.1 Grade 7H—UNS R52400. Unalloyed titanium plus 0.12 to 0.25 % palladium (Grade 7 with 58 ksi (400 MPa) minimum UTS), 1.1.8 Grade 9—UNS R56320. Titanium alloy (3.0 % aluminum, 2.5 % vanadium), 1.1.9 Grade 11—UNS R52250. Unalloyed titanium plus 0.12 to 0.25 % palladium, 1.1.10 Grade 12—UNS R53400. Titanium alloy (0.3 % molybdenum, 0.8 % nickel), 1.1.11 Grade 13—UNS R53413. Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.12 Grade 14—UNS R53414. Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.13 Grade 15—UNS R53415. Titanium alloy (0.5 % nickel, 0.05 % ruthenium), 1.1.14 Grade 16—UNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladium, 1.1.14.1 Grade 16H—UNS R52402. Unalloyed titanium plus 0.04 to 0.08 % palladium (Grade 16 with 58 ksi (400 MPa) minimum UTS), 1.1.15 Grade 17—UNS R52252. Unalloyed titanium plus 0.04 to 0.08 % palladium, 1.1.16 Grade 18—UNS R56322. Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.04 to 0.08 % palladium, 1.1.17 Grade 19—UNS R58640. Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum), 1.1.18 Grade 20—UNS R58645. Titanium alloy (3 % aluminum, 8 % vanadium, 6 % chromium, 4 % zirconium, 4 % molybdenum) plus 0.04 % to 0.08 % palladium, 1.1.19 Grade 21—UNS R58210. Titanium alloy (15 % molybdenum, 3 % aluminum, 2.7 % niobium, 0.25 % silicon), 1.1.20 Grade 23—UNS R56407. Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI), 1.1.21 Grade 24—UNS R56405. Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.04 % to 0.08 % palladium, 1.1.22 Grade 25—UNS R56403. Titanium alloy (6 % aluminum, 4 % vanadium) plus 0.3 % to 0.8 % nickel and 0.04 % to 0.08 % palladium, 1.1.23 Grade 26—UNS R52404. Unalloyed titanium plus 0.08 to 0.14 % ruthenium, 1.1.23.1 Grade 26H—UNS R52404. Unalloyed titanium plus 0.08 to 0.14 % ruthenium (Grade 26 with 58 ksi (400 MPa) minimum UTS), 1.1.24 Grade 27—UNS R52254. Unalloyed titanium plus 0.08 to 0.14 % ruthenium, 1.1.25 Grade 28—UNS R56323. Titanium alloy (3 % aluminum, 2.5 % vanadium) plus 0.08 to 0.14 % ruthenium, 1.1.26 Grade 29—UNS R56404. Titanium alloy (6 % aluminum, 4 % vanadium with extra low interstitial elements, ELI) plus 0.08 to 0.14 % ruthenium, 1.1.27 Grade 30—UNS R53530. Titanium alloy (0.3 % cobalt, 0.05 % palladium), 1.1.28 Grade 31—UNS R53532. Titanium alloy (0.3 % cobalt, 0.05 % palladium), 1.1.29 Grade 32—UNS R55111. Titanium alloy (5 % aluminum, 1 % tin, 1 % zirconium, 1 % vanadium, 0.8 % molybdenum), 1.1.30 Grade 33—UNS R53442. Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.02 5 % ruthenium, 0.15 % chromium), 1 This specification is under the jurisdiction of ASTM Committee B10 on Reactive and Refractory Metals and Alloys and is the direct responsibility of Subcommittee B10.01 on Titanium. Current edition approved April 1, 2020. Published April 2020. Originally approved in 1952. Last previous edition approved in 2020 as B265 – 20. DOI: 10.1520/B0265-20A. 2 For ASME Boiler and Pressure Vessel Code applications see related Specifications SB-265 in Section II of that Code. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 1.1.31 Grade 34—UNS R53445. Titanium alloy (0.4 % nickel, 0.015 % palladium, 0.025 % ruthenium, 0.15 % chromium), 1.1.32 Grade 35—UNS R56340. Titanium alloy (4.5 % aluminum, 2 % molybdenum, 1.6 % vanadium, 0.5 % iron, 0.3 % silicon), 1.1.33 Grade 36—UNS R58450. Titanium alloy (45 % niobium), 1.1.34 Grade 37—UNS R52815. Titanium alloy (1.5 % aluminum), 1.1.35 Grade 38—UNS R54250. Titanium alloy (4 % aluminum, 2.5 % vanadium, 1.5 % iron), 1.1.36 Grade 39—UNS R53390. Titanium alloy (0.25 % iron, 0.4 % silicon), and 1.1.37 Grade 40—UNS R54407. Titanium alloy (3.9 % vanadium, 0.85 % aluminum, 0.25 % iron, 0.25 % silicon). NOTE 1—H grade material is identical to the corresponding numeric grade (that is, Grade 2H = Grade 2) except for the higher guaranteed minimum UTS, and may always be certified as meeting the requirements of its corresponding numeric grade. Grades 2H, 7H, 16H, and 26H are intended primarily for pressure vessel use. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM B265-20a Referenced Document

• ASTM E1409 Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique
• ASTM E1447 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method
• ASTM E1941 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys
• ASTM E2371 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)*， 2024-04-22 Update
• ASTM E2626 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals
• ASTM E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
• ASTM E290 Standard Test Methods for Bend Testing of Material for Ductility
• ASTM E539 Standard Test Method for X-Ray Emission Spectrometric Analysis of 6AI-4V Titanium Alloy
• ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials

ASTM B265-20a history

• 2020 ASTM B265-20a Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2020 ASTM B265-20 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2015 ASTM B265-15 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2013 ASTM B265-13ae1 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2013 ASTM B265-13a Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2013 ASTM B265-13 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2011 ASTM B265-11e1 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2011 ASTM B265-11 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2010 ASTM B265-10 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2009 ASTM B265-09ae1 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2009 ASTM B265-09a Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2009 ASTM B265-09 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2008 ASTM B265-08b Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2008 ASTM B265-08a Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2008 ASTM B265-08 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2007 ASTM B265-07 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2006 ASTM B265-06b Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2006 ASTM B265-06a Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2006 ASTM B265-06 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2005 ASTM B265-05e1 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2005 ASTM B265-05 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2003 ASTM B265-03 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 2002 ASTM B265-02 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 1999 ASTM B265-99e1 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
• 1999 ASTM B265-99 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate