ASTM D5273-18
Standard Guide for Analysis of Propylene Concentrates

Standard No.
ASTM D5273-18
Release Date
2018
Published By
American Society for Testing and Materials (ASTM)
Status
Replace By
ASTM D5273-23
Latest
ASTM D5273-23
Scope
1.1 This guide covers a list of the major grades of propylene concentrates produced in North America. It includes possible components and test methods, both ASTM and other, either actually used, or believed to be in use, to test for these properties. This guide is not intended to be used or construed as a set of specifications for any grade of propylene concentrate. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D5273-18 Referenced Document

  • ASTM D2163 Standard Test Method for Analysis of Liquefied Petroleum (LP) Gases and Propene Concentrates by Gas Chromatography
  • ASTM D2384 Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures
  • ASTM D2504 Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography
  • ASTM D2505 Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography
  • ASTM D2712 Standard Test Method for Hydrocarbon Traces in Propylene Concentrates by Gas Chromatography
  • ASTM D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)*， 2024-03-01 Update
  • ASTM D3246 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
  • ASTM D3700 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
  • ASTM D4178 Standard Practice for Calibrating Moisture Analyzers
  • ASTM D4468 Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry
  • ASTM D4629 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
  • ASTM D4864 Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography
  • ASTM D5454 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers
  • ASTM D6667 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence*， 2021-04-01 Update
  • ASTM D6729 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography*， 2020-06-01 Update
  • ASTM D7423 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection*， 2023-03-01 Update
  • ASTM D7994 Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatograp
  • ASTM D8098 Standard Test Method for Permanent Gases in C2 and C3 Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector*， 2023-03-01 Update

ASTM D5273-18 history

Standard Guide for Analysis of Propylene Concentrates


Copyright ©2024 All Rights Reserved