Introduction The purpose of this standard is to present a method of calculating the current-temperature relationship of bare overhead conductors. Conductor surface temperatures are a function of a) Conductor material properties b) Conductor diameter c) Conductor surface conditions d) Ambient weather conditions e) Conductor electrical current The first two of these properties are specific chemical and physical properties. The third property may vary with time@ and that variation is dependent upon ambient atmospheric conditions other than weather. The fourth property@ weather@ varies greatly with the hour and season. The fifth property@ conductor electrical current@ may be constant or may vary with power system loading@ generation dispatch@ and other factors. The equations relating electrical current to conductor temperature may be used in either of the following two ways: - To calculate the conductor temperature when the electrical current is known - To calculate the current that yields a given maximum allowable conductor temperature For the purposes of this standard@ either the electrical current is assumed constant for all time or it is assumed to undergo a step change from an initial current to a final current. The ambient weather conditions are assumed to be constant with time in both the steady-state and transient calculation methods described in this standard. This standard includes mathematical methods and indicates sources of the values to be used in the calculation of conductor temperatures and conductor thermal ratings. However@ because there is a great diversity of weather conditions and operating circumstances for which conductor temperatures and/or thermal ratings must be calculated@ the standard does not undertake to list actual temperature-current relationships for specific conductors or weather conditions. Each user must make his or her own assessment of which weather data and conductor characteristics best pertain to his or her area or particular transmission line. The calculation methods in this standard are also valid for the calculation of conductor temperature under fault conditions.
IEEE 738-1993 history
2023IEEE 738-2023 IEEE Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors
2012IEEE 738-2012 IEEE Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors
2006IEEE 738-2006 Standard for Calculating the Current-Temperature of Bare Overhead Conductors
1993IEEE 738-1993 Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors (Includes Access to Additional Content)
1986IEEE 738-1986 STANDARD FOR CALCULATION OF BARE OVERHEAD CONDUCTOR TEMPERATURE AND AMPACITY UNDER STEADY-STATE CONDITIONS