BS ISO 27126:2021 Thermoplastic multi-layer (nonvulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification
1 Scope
This document specifies requirements for four types of thermoplastic multi-layer (non-vulcanized)
hoses and hose assemblies for carrying hydrocarbons, solvents and chemicals. It specifies
bore sizes from 25 mm to 300 mm, working pressures from 0,4 MPa (4 bar) to 1,4 MPa
(14 bar) and working temperatures from −30 °C to 150 °C, according to type.
Type 1 hoses are suitable for vapour applications. Types 2 to 4 hoses are suitable
for liquid applications.
NOTE 1 See Annex A concerning the selection of the material for the inner wall of layers and any polymeric
coating of the internal wire helix related to the chemical(s) to be conveyed by the
hoses and/or hose assemblies.
NOTE 2 It is intended that the manufacturer be consulted where a polymeric coated internal
wire is being considered for use with low conductivity hydrocarbons or chemicals.
This document does not apply to hoses and hose assemblies for:
— aircraft refuelling
(see ISO 1825);
— fuel dispensing
(see ISO 5772);
...
BS ISO 27126:2021 history
2022BS ISO 27126:2021 Thermoplastic multi-layer (nonvulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification
2014BS ISO 27126:2014 Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification