ASTM D2889-95(2019)
Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels

Standard No.

ASTM D2889-95(2019)

Release Date

2019

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM D2889-95(2019)

Scope

1.1 This test method describes the calculation of true vapor pressures of petroleum distillate fuels for which distillation data may be obtained in accordance with Test Method D86 without reaching a decomposition point prior to obtaining 90 % by volume distilled. 1.2 The test method may be used to calculate vapor pressures at temperatures between the 0 % equilibrium flash temperature and the critical temperature of the fuel. Provision is included for obtaining a calculated critical temperature for fuels for which it is not known. 1.3 Critical pressure-temperature data are usually not available for petroleum fuels. However, if both the critical pressure and critical temperature are known, the values shall be used as the coordinates in Fig. 1 to establish a critical point to be used instead of the focal point established as described in 6.5.4; and the calculations described in 6.5 through 6.5.4 are not required. If either a determined true boiling point or determined equilibrium flash vaporization temperature at 0 % distilled at atmospheric pressure is known, the determined value shall be used to establish the lower limit of the bubble-point line referred to in 6.4. 1.4 The method is not reliable for distillate fuels having a boiling range of less than 100 °F (38 °C) between the Test Method D86 10 % by volume and 90 % by volume distilled temperatures. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D2889-95(2019) Referenced Document

• ASTM D287 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
• ASTM D86 Standard Test Method for Distillation of Petroleum Products

ASTM D2889-95(2019) history

• 2019 ASTM D2889-95(2019) Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
• 1995 ASTM D2889-95(2015) Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
• 1995 ASTM D2889-95(2010) Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
• 1995 ASTM D2889-95(2005)e1 Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
• 1995 ASTM D2889-95(2005) Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels
• 1995 ASTM D2889-95(2000) Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels