ISO 11997-3:2022
Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 3: Testing of coating systems on materials and components in automotive construction
- Standard No.
- ISO 11997-3:2022
- Release Date
- 2022
- Published By
- International Organization for Standardization (ISO)
- Latest
- ISO 11997-3:2022
- Scope
- This document specifies a method based on a cyclic corrosion test for testing the corrosion protection of automobiles using coating systems on aluminium, steel or galvanized steel. The test method uses corrosive conditions (temperature and humidity ramps and salt spray) to create realistic corrosion patterns. These corrosion patterns are typical for automobiles, and they are comparable in the case of sufficiently similar protective coating systems. In particular, the accelerated test investigates the delamination/corrosion creep that results from defined artificial damage to a coating. Investigations of surface and edge corrosion or investigations of adhesive specimens or components are also covered. This cyclic corrosion test is also suitable for testing corrosion in flanged areas or near gaps. This document was developed for the assessment of coated substrates (test specimens, bodywork and mounted parts) in the automotive industry. Other applications, such as components with unpainted metallic coatings, were not part of the scope of the standardization work. This document was originally developed for coating systems on aluminium, steel or galvanized steel but it can also be used for the assessment of the corrosion resistance of coating systems on other metals and their alloys.
ISO 11997-3:2022 Referenced Document
- ISO 17872 Paints and varnishes — Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
- ISO 20567-1 Paints and varnishes - Determination of stone-chip resistance of coatings - Part 1: Multi-impact testing
- ISO 2409 Paints and varnishes — Cross-cut test
- ISO 3574 Cold-reduced carbon steel sheet of commercial and drawing qualities
- ISO 4618 Paints and varnishes — Vocabulary*， 2023-02-06 Update
- ISO 4628-1 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 1: General introduction and designation system
- ISO 4628-2 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering
- ISO 4628-3 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting
- ISO 4628-4 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 4: Assessment of degree of cracking
- ISO 4628-5 Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 5: Assessment of degree of flaking*， 2022-11-11 Update
- ISO 4628-8 Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial
- ISO 9227:2017 Corrosion tests in artificial atmospheres - Salt spray tests
ISO 11997-3:2022 history
- 2022 ISO 11997-3:2022 Paints and varnishes — Determination of resistance to cyclic corrosion conditions — Part 3: Testing of coating systems on materials and components in automotive construction
