These requirements apply to aerosol duct sealants for use with sheet metal air ducts that are fabricated and installed in accordance with ANSI/SMACNA HVAC Duct Construction Standards ?C Metal and Flexible. These requirements do not apply to aerosol duct sealants for use with factory made air ducts listed and labeled in accordance with UL 181@ (including rigid fiberglass ducts@ flexible wire helix ducts@ or spirally wound metal ducts not conforming to SMACNA requirements). These requirements do not apply to spray sealants intended to be used as a substitute for or to supplement mechanical attachment. Aerosol duct sealants are used for the purpose of additional sealing of seams and joints of sheet metal air duct systems. These requirements are limited to application in ducts with individual openings no greater than 5/8 in. diameter@ and seam / joint openings no greater than 5/8 in. across. These requirements are intended to address performance characteristics of the sprayed sealant relative to not adversely affecting the sheet metal ducts to which they are applied. These requirements are not intended to address or rate the sealing efficacy of the duct sprayed sealant. Aerosol duct sealants are to be applied by trained professionals and specifically in accordance with accompanying installation instructions. These requirements do not address the human health effects of the aerosol duct sealant.
UL SUBJECT 1381-2013 history
2013UL SUBJECT 1381-2013 Outline of Investigation for Aerosol Duct Sealant (Issue 1)