ASTM E1316-22
Standard Terminology for Nondestructive Examinations
Home
ASTM E1316-22
Standard No.
ASTM E1316-22
Release Date
2022
Published By
American Society for Testing and Materials (ASTM)
Status
Be replaced
Replace By
ASTM E1316-22a
Latest
ASTM E1316-24
Scope
1.1 This standard defines the terminology used in the standards prepared by the E07 Committee on Nondestructive Testing. These nondestructive testing (NDT) methods include: acoustic emission, electromagnetic testing, gammaand X-radiology, leak testing, liquid penetrant testing, magnetic particle testing, neutron radiology and gauging, ultrasonic testing, and other technical methods. 1.2 Committee E07 recognizes that the terms examination, testing, and inspection are commonly used as synonyms in nondestructive testing. For uniformity and consistency in E07 nondestructive testing standards, Committee E07 encourages the use of the terms examination or inspection and their derivatives when describing the application of nondestructive test methods. In a specific standard, either examination or inspection shall be used consistently throughout the document. Similarly, E07 encourages the use of the term test and its derivatives when referring to the body of knowledge of a nondestructive testing method. There are, however, appropriate exceptions when the term test and its derivatives may be used to describe the application of a nondestructive test, such as measurements which produce a numeric result (for example, when using the leak testing method to perform a leak test on a component, or an ultrasonic measurement of velocity). Additionally, the term test should be used when referring to the NDT method, that is, Radiologic Testing (RT), Ultrasonic Testing (UT), and so forth. (Example: Radiologic Testing (RT) is often used to examine material to detect internal discontinuities.) NOTE 1—The following sentences clarify this policy and illustrate its use: (a) Nondestructive testing methods are used extensively for the examination or inspection of materials and components. (b) The E07 Committee on Nondestructive Testing has prepared many documents to promote uniform usage of the nondestructive testing methods that are applied to examine or inspect materials and components. (c) Radiologic Testing (RT) is often used to inspect material to detect internal discontinuities. (d) Magnetic Particle Testing (MT), Liquid Penetrant Testing (PT), and Visual Testing (VT) are often used to examine the surface of a component. (e) The Bubble Leak Testing (BLT) method is sometimes used to leak test a pressure containing component to detect leaks. (f) A guide for Nondestructive Testing of additively manufactured materials will describe several methods but a practice will focus on a single inspection method. 1.3 Section A defines terms that are common to multiple NDT methods, whereas the subsequent sections define terms pertaining to specific NDT methods. 1.4 As shown on the chart below, when a nondestructive examination or inspection produces an indication, the indication is subject to interpretation as false, nonrelevant, or relevant. If it has been interpreted as relevant, the necessary subsequent evaluation will result in the decision to accept or reject the material. With the exception of accept and reject, which retain the meaning found in most dictionaries, all the 1 This terminology is under the jurisdiction of ASTM Committee E07 on Nondestructive Testing and is the direct responsibility of Subcommittee E07.92 on Editorial Review. Current edition approved Feb. 1, 2022. Published February 2022. Originally approved in 1989. Last previous edition approved in 2021 as E1316 – 21d. DOI: 10.1520/E1316-22. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 words used in the chart are defined in Section A. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E1316-22 Referenced Document
ASTM E1106
Standard Method for Primary Calibration of Acoustic Emission Sensors
ASTM E1781
Standard Practice for Secondary Calibration of Acoustic Emission Sensors
ASTM E94
Standard Guide for Radiographic Examination
*
,
2024-04-21 Update
ASTM E1316-22 history
2024
ASTM E1316-24
Standard Terminology for Nondestructive Examinations
1970
ASTM E1316-23b
Standard Terminology for Nondestructive Examinations (Standard + Redline PDF Bundle)
2023
ASTM E1316-23a
Standard Terminology for Nondestructive Examinations
2023
ASTM E1316-23
Standard Terminology for Nondestructive Examinations
2022
ASTM E1316-22a
Standard Terminology for Nondestructive Examinations
2022
ASTM E1316-22
Standard Terminology for Nondestructive Examinations
2021
ASTM E1316-21d
Standard Terminology for Nondestructive Examinations
2021
ASTM E1316-21c
Standard Terminology for Nondestructive Examinations
2021
ASTM E1316-21b
Standard Terminology for Nondestructive Examinations
2021
ASTM E1316-21a
Standard Terminology for Nondestructive Examinations
2021
ASTM E1316-21
Standard Terminology for Nondestructive Examinations
2020
ASTM E1316-20a
Standard Terminology for Nondestructive Examinations
2020
ASTM E1316-20
Standard Terminology for Nondestructive Examinations
2019
ASTM E1316-19b
Standard Terminology for Nondestructive Examinations
2019
ASTM E1316-19a
Standard Terminology for Nondestructive Examinations
2019
ASTM E1316-19
Standard Terminology for Nondestructive Examinations
2018
ASTM E1316-18a
Standard Terminology for Nondestructive Examinations
2018
ASTM E1316-18
Standard Terminology for Nondestructive Examinations
2017
ASTM E1316-17a
Standard Terminology for Nondestructive Examinations
2017
ASTM E1316-17
Standard Terminology for Nondestructive Examinations
2016
ASTM E1316-16a
Standard Terminology for Nondestructive Examinations
2016
ASTM E1316-16
Standard Terminology for Nondestructive Examinations
2015
ASTM E1316-15a
Standard Terminology for Nondestructive Examinations
2015
ASTM E1316-15
Standard Terminology for Nondestructive Examinations
2014
ASTM E1316-14e1
Standard Terminology for Nondestructive Examinations
2014
ASTM E1316-14
Standard Terminology for Nondestructive Examinations
2013
ASTM E1316-13d
Standard Terminology for Nondestructive Examinations
2013
ASTM E1316-13c
Standard Terminology for Nondestructive Examinations
2013
ASTM E1316-13b
Standard Terminology for Nondestructive Examinations
2013
ASTM E1316-13a
Standard Terminology for Nondestructive Examinations
2013
ASTM E1316-13
Standard Terminology for Nondestructive Examinations
2012
ASTM E1316-12
Standard Terminology for Nondestructive Examinations
2011
ASTM E1316-11b
Standard Terminology for Nondestructive Examinations
2011
ASTM E1316-11a
Standard Terminology for Nondestructive Examinations
2011
ASTM E1316-11
Standard Terminology for Nondestructive Examinations
2010
ASTM E1316-10c
Standard Terminology for Nondestructive Examinations
2010
ASTM E1316-10b
Standard Terminology for Nondestructive Examinations
2010
ASTM E1316-10a
Standard Terminology for Nondestructive Examinations
2010
ASTM E1316-10
Standard Terminology for Nondestructive Examinations
2009
ASTM E1316-09a
Standard Terminology for Nondestructive Examinations
2009
ASTM E1316-09
Standard Terminology for Nondestructive Examinations
2008
ASTM E1316-08a
Standard Terminology for Nondestructive Examinations
2008
ASTM E1316-08
Standard Terminology for Nondestructive Examinations
2007
ASTM E1316-07c
Standard Terminology for Nondestructive Examinations
2007
ASTM E1316-07b
Standard Terminology for Nondestructive Examinations
2007
ASTM E1316-07a
Standard Terminology for Nondestructive Examinations
2007
ASTM E1316-07
Standard Terminology for Nondestructive Examinations
2006
ASTM E1316-06a
Standard Terminology for Nondestructive Examinations
2006
ASTM E1316-06
Standard Terminology for Nondestructive Examinations
2005
ASTM E1316-05
Standard Terminology for Nondestructive Testing
2004
ASTM E1316-04a
Standard Terminology for Nondestructive Examinations
2004
ASTM E1316-04
Standard Terminology for Nondestructive Examinations
2003
ASTM E1316-03
Standard Terminology for Nondestructive Examinations
2002
ASTM E1316-02a
Standard Terminology for Nondestructive Examinations
2002
ASTM E1316-02
Standard Terminology for Nondestructive Examinations
2001
ASTM E1316-01
Standard Terminology for Nondestructive Examinations
2000
ASTM E1316-00a
Standard Terminology for Nondestructive Examinations
2000
ASTM E1316-00
Standard Terminology for Nondestructive Examinations
Copyright ©2024 All Rights Reserved