ASTM D5086-20 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
1.1 This test method is applicable to the determination of calcium, magnesium, potassium, and sodium in atmospheric wet deposition (rain, snow, sleet, and hail) by flame atomic absorption spectrophotometry (FAAS) (1).2
1.2 The concentration ranges are listed below. The range tested was confirmed using the interlaboratory collaborative test (see Table 1 for a statistical summary of the collaborative test). MDL (mg/L) (2) Range of Method (mg/L) Range Tested (mg/L) Calcium
0.009
0.03–3.00
0.168–2.939 Magnesium
0.003
0.01–1.00
0.039–0.682 Potassium
0.003
0.01–1.00
0.029–0.499 Sodium
0.003
0.01–2.00
0.105–1.84
1.3 The method detection limit (MDL) as given in
1.2 is based on single operator precision. Detection limits vary by instrumentation. Laboratories may be able to achieve lower detection limits. The method detection limit for this method as described in
1.2 was determined in 1987 (2).
1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given in
8.3,
8.7, 12.1.8, and Section 9.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D1193 Standard Specification for Reagent Water
ASTM D1356 Standard Terminology Relating to Sampling and Analysis of Atmospheres*, 2024-04-21 Update
ASTM D2777 Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
ASTM D4453 Standard Practice for Handling of Ultra-Pure Water Samples
ASTM D4691 Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry
ASTM D5012 Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition
ASTM D883 Standard Terminology Relating to Plastics*, 2024-02-01 Update
ASTM E131 Standard Definitions of Terms and Symbols Relating to Molecular Spectroscopy
ASTM E275 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
ASTM E694 Standard Specification for Laboratory Glass Volumetric Apparatus
IEEE/ASTM SI 10 American National Standard for Metric Practice
ISO 8655 Piston-operated volumetric apparatus — Part 9: Manually operated precision laboratory syringes*, 2022-04-22 Update
ASTM D5086-20 history
2020ASTM D5086-20 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
2001ASTM D5086-01(2013) Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
2001ASTM D5086-01(2008) Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
2001ASTM D5086-01 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry
1995ASTM D5086-95 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry