ASTM E2121-21
Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings

Standard No.

ASTM E2121-21

Release Date

2021

Published By

American Society for Testing and Materials (ASTM)

Latest

ASTM E2121-21

Scope

1.1 This practice describes methods for reducing radon entry into existing attached and detached residential buildings three stories or less in height. This practice is intended for use by trained, certified or licensed, or both, or otherwise qualified individuals. 1.2 These methods are based on radon mitigation techniques that have been effective in reducing radon levels in a wide range of residential buildings and soil conditions. These fan powered mitigation methods are listed in Appendix X1. More detailed information is contained in references cited throughout this practice. 1.3 This practice is intended to provide radon mitigation contractors with a uniform set of practices that will ensure a high degree of safety and the likelihood of success in retrofitting low rise residential buildings with radon mitigation systems. 1.4 The methods described in this practice apply to currently occupied or formerly occupied residential buildings, including buildings converted or being converted to residential use, as well as residential buildings changed or being changed by addition(s) or alteration(s), or both. The radon reduction activities performed on new dwellings, while under construction, before occupancy, and for up to one year after occupancy, are covered by Practice E1465. 1.5 This practice also is intended as a model set of practices, which can be adopted or modified by state and local jurisdictions, to fulfill objectives of their specific radon contractor certification or licensure programs. Radon mitigation performed in accordance with this practice is considered ordinary repair. 1.6 The methods addressed in this practice include the following categories of contractor activity: general practices, building investigation, systems design, systems installation, materials, monitors and labeling, post-mitigation testing, and documentation. 1.7 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See Section 6 for specific safety hazards. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM E2121-21 Referenced Document

• ASTM E1465 Guide for Radon Control Options for the Design and Construction of New Low Rise Residential Buildings
• ASTM E1745 Standard Specification for Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
• ASTM E631 Standard Terminology of Building Constructions

ASTM E2121-21 history

• 2021 ASTM E2121-21 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
• 2013 ASTM E2121-13 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
• 2012 ASTM E2121-12 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
• 2011 ASTM E2121-11 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
• 2009 ASTM E2121-09 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
• 2008 ASTM E2121-08 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
• 2003 ASTM E2121-03 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
• 2002 ASTM E2121-02a Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
• 2002 ASTM E2121-02 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
• 2001 ASTM E2121-01 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings