ASTM D1886-14(2021)e1
Standard Test Methods for Nickel in Water

Standard No.
ASTM D1886-14(2021)e1
Release Date
2021
Published By
American Society for Testing and Materials (ASTM)
Latest
ASTM D1886-14(2021)e1
Scope
1.1 These test methods 2, 3, 4 cover the atomic absorption determination of nickel in water and wastewaters. Three test methods are given as follows: Concentration Range Sections Test Method A—Atomic Absorption, Direct 0.1 to 10 mg/L 7 – 16 Test Method B—Atomic Absorption, Chelation-Extraction 10 to 1000 µg/L 17 – 26 Test Method C—Atomic Absorption, Graphite Furnace 5 to 100 µg/L 27 – 36 1.2 Test Methods A, B, and C have been used successfully with reagent grade water and natural waters. Evaluation of Test Method C was also made in condensate from a medium Btu coal gasification process. It is the user’s responsibility to ensure the validity of these test methods for other matrices. 1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversion to inch-pound units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazards statements, see Note 5, 11.8.1, 21.11, 23.7, and 23.10. 1.5 Two former colorimetric test methods were discontinued. Refer to Appendix X1 for historical information. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D1886-14(2021)e1 Referenced Document

  • ASTM D1066 Standard Practice for Sampling Steam
  • ASTM D1068 Standard Test Methods for Iron in Water
  • ASTM D1129 Standard Terminology Relating to Water
  • ASTM D1193 Standard Specification for Reagent Water
  • ASTM D1687 Standard Test Methods for Chromium in Water
  • ASTM D1688 Standard Test Methods for Copper in Water
  • ASTM D1691 Standard Test Methods for Zinc in Water
  • ASTM D2777 Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
  • ASTM D3370 Standard Practices for Sampling Water from Closed Conduits
  • ASTM D3557 Standard Test Methods for Cadmium in Water
  • ASTM D3558 Standard Test Methods for Cobalt in Water
  • ASTM D3559 Standard Test Methods for Lead in Water
  • ASTM D3919 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry
  • ASTM D4841 Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
  • ASTM D5673 Standard Test Method for Elements in Water by Inductively Coupled Plasma8212;Mass Spectrometry
  • ASTM D5810 Standard Guide for Spiking into Aqueous Samples 
  • ASTM D5847 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
  • ASTM D858 Standard Test Methods for Manganese in Water

ASTM D1886-14(2021)e1 history

Standard Test Methods for Nickel in Water



Copyright ©2024 All Rights Reserved