PREN 16798-7-2014
Energy performance of buildings - Part 7: Ventilation for buildings - Modules M5-1@ M5-5@ M5-6@ M5-8 - Calculation methods for the determination of air flow rates in buildings including infiltration

Standard No.
PREN 16798-7-2014
Release Date
2014
Published By
CEN - European Committee for Standardization
Latest
PREN 16798-7-2014
Scope
This European Standard describes the methods to calculate the ventilation air flow rates for to be used for energy calculations evaluation@ heating and cooling loads. This European Standard applies to buildings with: - Mechanical ventilation systems (mechanical exhaust@ mechanical supply or balanced system); -Passive duct ventilation systems for residential and low-rise non-residential buildings; - Combustion appliances; - Windows opening by manual operation; - Kitchens where cooking is for immediate use (including restaurants) This European Standard is applicable to hybrid systems combining mechanical and passive systems in residential and low-rise non-residential buildings. This European Standard applies to buildings smaller than 100 m and rooms where vertical difference is smaller than 15 K. The results provided by the standard are: -the air flow rates entering or leaving a ventilation zone; - the air flow rates required to be distributed by the mechanical ventilation system@ if present. This European Standard is not applicable to: - Buildings with kitchens where cooking is not for immediate use - Buildings with automatic windows (or openings) -Buildings with industry process ventilation. The definition of ventilation and airtightness requirements (as indoor air quality@ heating fire protection...) is not covered by this standard. The following information can be found in other standards and technical reports: - guidance to estimate pressure drops in ducts (CR 14378:2002) Table 1 shows the relative position of this standard within the EN EPB package of standards.

PREN 16798-7-2014 history

  • 2014 PREN 16798-7-2014 Energy performance of buildings - Part 7: Ventilation for buildings - Modules M5-1@ M5-5@ M5-6@ M5-8 - Calculation methods for the determination of air flow rates in buildings including infiltration

PREN 16798-7-2014 -All Parts




Copyright ©2024 All Rights Reserved