BS EN 607:2023 PDF

Standard No.: BS EN 607:2023
Published By: American National Standards Institute （ANSI)
Latest: BS EN 607:2023

Scope: This document specifies the requirements for eaves gutters made of unplasticized poly(vinyl chloride) (PVC-U), fittings and the system intended to be used for rainwater roof drainage. It applies to: — solid wall monolayer gutters; — solid wall multilayer gutters; — solid wall fittings. This document is not applicable to PVC gutters with a foamed layer. The test parameters for the test methods are specified in the document. Gutters covered by this document can be used in conjunction with fittings of acrylic materials provided these products meet the applicable requirements of this document. downpipes conforming to EN 12200-1 [1] and fixed with brackets complying with EN 1462 [2]. This document is applicable to PVC-U gutter systems of any shape with rubber seal or adhesive joints. range and the design to take into account their particular requirements and any relevant national regulations and installation practices or codes.

BS EN 607:2023 Referenced Document

EN 14680 Adhesives for non-pressure thermoplastics piping systems - Specifications*， 2015-10-01 Update
EN 14814 Adhesives for thermoplastic piping systems for fluids under pressure - Specifications*， 2016-05-01 Update
EN 20105-A02 Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993)*， 1994-08-01 Update
EN 513 Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the resistance to artificial weathering*， 2018-12-01 Update
EN 681-1 Elastomeric seals Material requirements for pipe joint seals used in water and drainage applications Part 1: Vulcanized rubber (Incorporates Amendments A1: 1998 and A2: 2002; Incorporating Corrigendum August 2002; Incorporates Amendment A3: 2005)*， 2002-03-01 Update
EN 681-2 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers*， 2000-07-01 Update
EN 681-3 Elastomeric Seals - Materials Requirements for Pipe Joint Seals Used in Water and Drainage Applications - Part 3: Cellular Materials of Vulcanized Rubber Includes Amendment A1: 2002*， 2002-07-01 Update
EN 681-4 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements*， 2000-07-01 Update
EN ISO 1158 Plastics - Vinyl Chloride Homopolymers and Copolymers - Determination of Chlorine Content ISO 1158:1998*， 1998-04-01 Update
EN ISO 11664-4 Colorimetry - Part 4: CIE 1976 L*a*b*Colour space (ISO 11664-4:2008)*， 2011-04-01 Update
EN ISO 1183-3 Plastics - Methods for Determining the Density of Non-Cellular Plastics - Part 3: Gas Pyknometer Method ISO 1183-3:1999*， 1999-09-01 Update
EN ISO 2505 Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2023)*， 2023-10-25 Update
EN ISO 2507-1 Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method*， 2017-10-01 Update
EN ISO 2507-2 Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (P*， 2017-10-01 Update
EN ISO 3126 Plastics piping systems - Plastics components - Determination of dimensions ISO 3126:2005*， 2005-03-01 Update
EN ISO 3451-5 Plastics - Determination of Ash - Part 5: Poly(Vinyl Chloride) ISO 3451-5: 2002*， 2002-07-01 Update
EN ISO 4892-2 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps - Amendment 1: Classification of daylight filters (ISO 4892-2:2013/Amd 1:2021)*， 2021-07-31 Update
EN ISO 4892-3 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps*， 2016-03-01 Update
EN ISO 527-2 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)*， 2012-02-01 Update
EN ISO 580 Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005)*， 2005-02-01 Update
EN ISO 8256 Plastics - Determination of tensile-impact strength (ISO 8256:2023)*， 2023-12-13 Update
ISO 6259-2 Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vin*， 2020-09-16 Update

BS EN 607:2023 history

1970 BS EN 607:2023 Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing
2016 BS EN 12200-1:2016 Plastics rainwater piping systems for above ground external use. Unplasticized poly(vinyl chloride) (PVC-U). Specifications for pipes, fittings and the system
2000 BS EN 12200-1:2000 Plastics rainwater piping systems for above ground external use. Unplasticized poly (vinyl chloride) (PVC-U). Specifications for pipes, fittings and the system
1989 BS 4576-1:1989 Unplasticized polyvinyl chloride (PVC-U) rainwater goods and accessories - Half-round gutters and pipes of circular cross-section

Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing

BS EN 607:2023 Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing

BS EN 607:2023 Referenced Document

BS EN 607:2023 history

BS EN 607:2023
Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing