ISO 10896-1:2020
Rough-terrain trucks — Safety requirements and verification — Part 1: Variable-reach trucks

Standard No.

ISO 10896-1:2020

Release Date

2020

Published By

International Organization for Standardization (ISO)

Latest

ISO 10896-1:2020

Scope

This document specifies general safety requirements for non-slewing, rough-terrain variable-reach trucks (referred to as trucks), with rigid chassis and equipped with a telescopic lifting means (pivoting boom) on which a load-handling device such as a carriage with fork arms is typically fitted. Fork arms and other integrated attachments are considered to be parts of the truck. NOTE These trucks are also known as telehandlers, or telescopic handlers. For the purpose of this document, trucks are designed to transport, lift and place loads and can be driven on unimproved terrain. They can also be equipped with a variety of attachments or interchangeable equipment (e.g. fork arms, bale spikes, mowers, sweepers) which can be both load-carrying and non- load-carrying. Other standards, in addition to the relevant provisions of this document, can apply to the attachments. This document is not applicable to the following: a) industrial variable-reach trucks covered by ISO 3691-2; b) machines designed primarily for earth moving, such as loaders, even if their buckets are replaced by fork arms (see ISO 20474-3); c) trucks with articulated chassis; d) machines designed primarily with variable-length load suspension elements (e.g. chain, ropes) from which the load can swing freely in all directions (mobile cranes); e) trucks fitted with personnel/work platforms, designed to move persons to elevated working positions; f) trucks designed primarily for container handling. The significant hazards covered by this document are listed in Annex A. This document does not address hazards that can occur: — during manufacture; — when handling suspended loads, which can swing freely (see ISO 10896-4); — when using trucks on public roads; — when operating in potentially explosive atmospheres; — with a battery, LPG or hybrid as the primary power source. 

ISO 10896-1:2020 Referenced Document

• EN 12053 Safety of industrial trucks - Test methods for measuring noise emissions (Incorporates Amendment A1: 2008)
• EN 12895 Industrial Trucks - Electromagnetic Compatibility
• IEC 60529 Degrees of Protection Provided by Enclosures (IP Code) (Edition 2.1 ***Applies to French text only***)*， 2024-04-21 Update
• ISO 10263-3 Earth-moving machinery - Operator enclosure environment - Part 3: Pressurization test method
• ISO 10263-4 Earth-moving machinery - Operator enclosure environment - Part 4: Heating, ventilating and air conditioning (HVAC) test method and performance
• ISO 10896-6 Rough-terrain trucks — Safety requirements and verification — Part 6: Tilting operator's cabs AMENDMENT 1
• ISO 10896-7 Rough-terrain trucks - Safety requirements and verification - Part 7: Longitudinal load moment systems
• ISO 11112 Earth-moving machinery — Operator's seat — Dimensions and requirements AMENDMENT 1
• ISO 12100 Safety of machinery - General principles for design - Risk assessment and risk reduction
• ISO 12508 Earth-moving machinery - Operator station and maintenance areas - Bluntness of edges
• ISO 13284 Industrial trucks — Fork arm extensions and telescopic fork arms — Technical characteristics and strength requirements*， 2022-08-12 Update
• ISO 13732-1 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces
• ISO 13766-1 Earth-moving and building construction machinery - Electromagnetic compatibility (EMC) of machines with internal electrical power supply - Part 1: General EMC requirements under typical electromagnetic environmental conditions
• ISO 13849-1 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design*， 2023-04-26 Update
• ISO 13850 Safety of machinery - Emergency stop function - Principles for design
• ISO 13857 Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs
• ISO 15817 Earth-moving machinery - Safety requirements for remote operator control systems
• ISO 15818 Earth-moving machinery - Lifting and tying-down attachment points - Performance requirements
• ISO 18063-1 Rough-terrain trucks — Visibility test methods andtheirverification— Part1: Variable-reach trucks
• ISO 19014-1 Earth-moving machinery — Functional safety — Part 1: Methodology to determine safety- related parts of the control system and performance requirements
• ISO 21507 Earth-moving machinery - Performance requirements for non-metallic fuel tanks
• ISO 2330 Fork-lift trucks - Fork arms - Technical characteristics and testing
• ISO 2860 Earth-moving machinery; minimum access dimensions
• ISO 2867:2011 Earth-moving machinery - Access systems
• ISO 3449 Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements
• ISO 3457 Earth-moving machinery - Guards - Definitions and requirements
• ISO 3471:2008 Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements
• ISO 3795 Road vehicles, and tractors and machinery for agriculture and forestry - Determination of burning behaviour of interior materials
• ISO 3864-1 Graphical symbols - Safety colours and safety signs - Part 1: Design principles for safety signs and safety markings
• ISO 3864-2 Graphical symbols - Safety colours and safety signs - Part 2: Design principles for product safety labels
• ISO 4413:2010 Hydraulic fluid power - General rules and safety requirements for systems and their components
• ISO 5053-1 Industrial trucks — Vocabulary — Part 1: Types of industrial trucks*， 2020-06-04 Update
• ISO 5353 Earth-moving machinery, and tractors and machinery for agriculture and forestry - Seat index point
• ISO 6016 Earth-moving machinery - Methods of measuring the masses of whole machines, their equipment and components
• ISO 6292:2020 Powered industrial trucks and tractors — Brake performance and component strength
• ISO 6682 Earth-moving machinery — Zones of comfort and reach for controls AMENDMENT 1
• ISO 6683 Earth-moving machinery - Seat belts and seat belt anchorages - Performance requirements and tests
• ISO 7000 Graphical symbols for use on equipment — Index and synopsis
• ISO 7096 Earth-moving machinery — Laboratory evaluation of operator seat vibration
• ISO 9533 Earth-moving machinery - Machine-mounted audible travel alarms and forward horns - Test methods and performance criteria

ISO 10896-1:2020 history

• 2020 ISO 10896-1:2020 Rough-terrain trucks — Safety requirements and verification — Part 1: Variable-reach trucks
• 2012 ISO 10896-1:2012 Rough-terrain trucks - Safety requirements and verification - Part 1: Variable-reach trucks