ASTM E991-16
Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
- Standard No.
- ASTM E991-16
- Release Date
- 2016
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM E991-21
- Latest
- ASTM E991-21
- Scope
- 1.1 This practice applies to the instrumental color measurement of fluorescent specimens excited by near ultraviolet and visible radiation that results in fluorescent emission within the visible range. It is not intended for other types of photoluminescent materials such as phosphorescent, chemiluminescent, or electroluminescent, nor is this practice intended for the measurement of the fluorescent properties for chemical analysis. 1.2 This practice describes the instrumental measurement requirements, calibration procedures, and material standards needed for the color measurement of fluorescent specimens when illuminated by simulated daylight approximating CIE Standard Illuminant D65 (CIE D65). 1.3 This practice is limited in scope to colorimetric spectrometers providing continuous broadband polychromatic illumination of the specimen and employing only a viewing monochromator for analyzing the radiation leaving the specimen. 1.4 This practice can be used for calculating total tristimulus values and total chromaticity coordinates for fluorescent colors in the CIE Color System for either the CIE 1931 Standard Colorimetric Observer or the CIE 1964 Supplementary Standard Colorimetric Observer. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM E991-16 Referenced Document
- ASTM D2244 Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates
- ASTM D985 Standard Test Method for Brightness of Pulp, Paper, and Paperboard (Directional Reflectance at 457 nm)
- ASTM E1164 Standard Practice for Obtaining Spectrophotometric Data for Object-Color Evaluation
- ASTM E1247 Standard Test Method for Identifying Fluorescence in Object-Color Specimens by Spectrophotometry
- ASTM E1345 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements*， 2019-05-01 Update
- ASTM E1767 Standard Practice for Specifying the Geometry of Observations and Measurements to Characterize the Appearance of Materials
- ASTM E179 Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
- ASTM E2152 Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data*， 2023-06-01 Update
- ASTM E2153 Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color*， 2023-06-01 Update
- ASTM E2214 Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments*， 2023-12-01 Update
- ASTM E2301 Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:No*， 2022-10-01 Update
- ASTM E284 Standard Terminology of Appearance
- ASTM E308 Standard Practice for Computing the Colors of Objects by Using the CIE System
- ASTM E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ASTM E991-16 history
- 2021 ASTM E991-21 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
- 2016 ASTM E991-16 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
- 2011 ASTM E991-11 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
- 2006 ASTM E991-06 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
- 1998 ASTM E991-98 Standard Practice for Color Measurement of Fluorescent Specimens
