ETSI EN 300 127:1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Radiated Emission Testing of Physically Large telecommunication Systems (V1.2.1)
The present document specifies the technical requirements for the radiated emission measurement procedure for physically large systems used within the telecommunication network@ with the exception of radio equipment. It applies to physically large systems which are comprised of equipment (or systems) requiring installation documentation specific for those sites at which they are to be installed. In order to demonstrate compliance of such systems@ a minimum representative system is defined@ which is used for compliance testing. Installations built from units of the complying minimum representative system are deemed to satisfy the radiated emission requirements. The minimum representative system is representative of installed systems in terms of function (which includes at least one of each functional unit type) and electromagnetic radiation characteristics. The minimum representative system is subsequently referred to in the present document as the Equipment Under Test (EUT)@ to be used for compliance testing. Minimum representative systems shall be tested on an Open Area Test Site (OATS) or in a suitable chamber@ the limits to be used are those as specified in EN 55022 [1].
ETSI EN 300 127:1998 history
1999ETSI EN 300 127:1999 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Radiated Emission Testing of Physically Large telecommunication Systems (V1.2.1)
1998ETSI EN 300 127:1998 Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Radiated Emission Testing of Physically Large telecommunication Systems (V1.2.1)