Form This specification covers one type of titanium alloy plate in the beta-annealed condition up through 4.000 inches (101.60 mm) inclusive in thickness (see 8.6). Application This plate has been used typically for parts in damage-tolerant@ stress-corrosion-resistant applications requiring strength up to 750 ??(399 ??@ but usage is not limited to such applications. Classification Products shall be of the following conditions: Type I - Air Cooled Product cooled from secondary anneal in accordance with 3.4.2.1 and meeting stress-corrosion resistance requirements of 3.5.3. Type II - Slow Cooled Product cooled from secondary anneal in accordance with 3.4.2.2. Stress-corrosion resistance requirements of 3.5.3 are not applicable. When no type is specified@ Type I shall be supplied. Safety-Hazardous Materials While the materials@ methods@ applications@ and processes described or referenced in this specification may involve the use of hazardous materials@ this specification does not address the hazards that may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take necessary precautionary measures to ensure the health and safety of all personnel involved. Stress Corrosion Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; ARP982 recommends practices to minimize such conditions.