ASTM E2913/E2913M-21
Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
- Standard No.
- ASTM E2913/E2913M-21
- Release Date
- 2021
- Published By
- American Society for Testing and Materials (ASTM)
- Latest
- ASTM E2913/E2913M-21
- Scope
- 1.1 This practice is similar to Practice E1644 and covers the hot, nitric acid digestion of lead (Pb) from a composited sample of up to four individual wipe samples of settled dust collected from equally-sized areas in the same space. 1.2 This practice contains notes which are explanatory and not part of mandatory requirements of the practice. 1.3 This practice should be used by analysts experienced in digestion techniques such as hot blocks. Like all procedures used in an analytical laboratory, this practice needs to be validated for use and shown to produce acceptable results before being applied to client samples. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E2913/E2913M-21 Referenced Document
- ASTM D1129 Standard Terminology Relating to Water
- ASTM D1193 Standard Specification for Reagent Water
- ASTM D6966 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
- ASTM E1605 Standard Terminology Relating to Lead in Buildings*， 2022-11-01 Update
- ASTM E1613 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
- ASTM E1644 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
- ASTM E1728 Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques
- ASTM E1792 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
- ASTM E2051 Standard Practice for the Determination of Lead in Paint, Settled Dust, Soil and Air Particulate by Field-Portable Electroanalysis *， 2024-04-21 Update
- ASTM E2239 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities*， 2024-03-01 Update
- ASTM E2271/E2271M Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings*， 2022-03-01 Update
- ASTM E3074/E3074M Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single Family Dwellings, in Individual Units of Multifamily Dwellings, and in Other Child-Occupied Facilities*， 2024-04-01 Update
- ASTM E631 Standard Terminology of Building Constructions
- ISO 1042 Laboratory glassware - One-mark volumetric flasks
- ISO 3585 Borosilicate glass 3.3 - Properties
ASTM E2913/E2913M-21 history
- 2021 ASTM E2913/E2913M-21 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
- 2019 ASTM E2913/E2913M-19 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
- 2014 ASTM E2913-14 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
