ASTM A414/A414M-14(2019)
Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
- Standard No.
- ASTM A414/A414M-14(2019)
- Release Date
- 2019
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM A414/A414M-23
- Latest
- ASTM A414/A414M-23
- Scope
- 1.1 This specification2 covers hot-rolled carbon steel sheet for pressure vessels involving fusion welding or brazing. Welding and brazing technique is of fundamental importance and shall be in accordance with commercial practices. 1.2 The following grades are included in this specification: Mechanical Requirements Yield Strength, min Tensile Strength, min Grade ksi MPa ksi MPa A 25 170 45 310 B 30 205 50 345 C 33 230 55 380 D 35 240 60 415 E 38 260 65 450 F 42 290 70 485 G 45 310 75 515 H 45 310 75 515 1.3 Hot-rolled carbon steel sheet is generally furnished in cut lengths and to decimal thickness only. Coils may be furnished, provided tension test specimens are taken to represent the middle of the slab as required by 6.1.3. The purchaser should recognize this may require cutting the coils to obtain test samples and results in half-size coils. The sheet is furnished to the following size limits: Width, in. [mm] Thickness, in. [mm] Over 12 [Over 300] 0.270 to 0.230 [7.0 to 6.0] sheet (coils only) Under 0.230 to 0.057 [6.0 to 1.5] sheet 1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. 1.5 Tolerances are found in General Requirements Specifications A568/A568M and A635/A635M. The appropriate General Requirements specification is applied based on the thickness and width of the product ordered. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM A414/A414M-14(2019) Referenced Document
- ASTM A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
- ASTM A568/A568M Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for*， 2019-11-01 Update
- ASTM A635/A635M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General*， 2022-09-01 Update
- ASTM A941 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys*， 2024-03-01 Update
ASTM A414/A414M-14(2019) history
- 2023 ASTM A414/A414M-23 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
- 2019 ASTM A414/A414M-14(2019) Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
- 2014 ASTM A414/A414M-14 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
- 2013 ASTM A414/A414M-13 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
- 2010 ASTM A414/A414M-10 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
- 2009 ASTM A414/A414M-09 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
- 2007 ASTM A414/A414M-07 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
- 2006 ASTM A414/A414M-06 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
- 2005 ASTM A414/A414M-05 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
- 2004 ASTM A414/A414M-04 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
- 2001 ASTM A414/A414M-01 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
- 2000 ASTM A414/A414M-00 Standard Specification for Steel, Sheet, Carbon, for Pressure Vessels
