BS EN IEC 61010-2-012:2022+A11:2022
Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for climatic and environmental testing and other temperature conditioning equipment

Standard No.

BS EN IEC 61010-2-012:2022+A11:2022

Release Date

2022

Published By

British Standards Institution (BSI)

Latest

BS EN IEC 61010-2-012:2022+A11:2022

Scope

1   Scope and object This clause of Part 1 is applicable except as follows: 1.1.1   Equipment included in scope Replacement: Replace the second paragraph by the following: This part of IEC 61010 specifies safety requirements for electrical equipment and its accessories within the categories a) through c), wherever it is intended to be used, whenever that equipment incorporates one or more of the following characteristics: — A refrigerating system that is acted on or impacted by an integral heating function such that the combined heating and refrigerating system generates additional and/or more severe hazards than those for the two systems if treated separately. — The materials being treated in the intended application introduce significant heat into the refrigerating system , so that the refrigerating system in the application yields additional and/or more severe hazards than those for the ref...

BS EN IEC 61010-2-012:2022+A11:2022 Referenced Document

• EN 12178 Refrigerating systems and heat pumps - Liquid level indicating devices - Requirements@ testing and marking
• EN 12263 Refrigerating systems and heat pumps - Safety switching devices for limiting the pressure - Requirements and tests
• EN 12284 Refrigerating systems and heat pumps - Valves - Requirements, testing and marking
• EN 12693 Refrigerating systems and heat pumps - Safety and environmental requirements - Positive displacement refrigerant compressors
• EN 13136 Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation (Incorporates Amendment A1: 2018)*， 2024-04-21 Update
• EN 13445-1 Unfired pressure vessels - Part 1: General
• EN 13445-2 Unfired pressure vessels - Part 2: Materials
• EN 13445-3 Unfired pressure vessels - Part 3: Design
• EN 13445-4 Unfired pressure vessels - Part 4: Fabrication
• EN 13445-5 Unfired pressure vessels - Part 5: Inspection and testing
• EN 13445-6 Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
• EN 13445-8 Unfired pressure vessels - Part 8: Additional requirements for pressure vessels of aluminium and aluminium alloys
• EN 13480-1 Metallic industrial piping - Part 1: General
• EN 13480-2 Metallic industrial piping - Part 2: Materials
• EN 13480-3 Metallic industrial piping - Part 3: Design and calculation
• EN 13480-4 Metallic industrial piping - Part 4: Fabrication and installation
• EN 13480-5 Metallic industrial piping - Part 5: Inspection and testing
• EN 13480-6 Metallic industrial piping - Part 6: Additional requirements for buried piping
• EN 13480-8 Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
• EN 14276-1 Pressure equipment for refrigerating systems and heat pumps - Part 1: Vessels - General requirements
• EN 14276-2 Pressure equipment for refrigerating systems and heat pumps - Part 2: Piping - General requirements
• EN 1736 Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators, expansion joints and non-metallic tubes - Requirements, design and installation*， 2024-04-21 Update
• EN 1779:1999 Non-destructive testing - Leak testing - Criteria for method and technique selection
• EN 61770 Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets*， 2023-06-30 Update
• EN 809 Pumps and pump units for liquids - Common safety requirements (Incorporates Amendment A1: 2009; Incorporating corrigendum July 2010)
• EN 837-1 Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing
• EN 837-2 Pressure gauges - Part 2: Selection and installation recommendations for pressure gauges
• EN 837-3 Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing
• IEC 60079-15:2010 Explosive atmospheres - Part 15: Equipment protection by type of protection "n"
• IEC 60079-20-1 Explosive atmospheres - Part 20-1: Material characteristics for gas and vapour classification - Test methods and data; Corrigendum 1
• IEC 60204-1 Safety of machinery - Electrical equipment of machines - Part 1: General requirements*， 2024-04-21 Update
• IEC 60335-2-34:2012 Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors
• IEC 60335-2-34:2012/AMD1:2015 Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors; Amendment 1
• IEC 60335-2-34:2012/AMD2:2016 Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors; Amendment 2
• IEC 60950-1:2005 Information technology equipment - Safety - Part 1: General requirements
• ISO 4126-1 Safety devices for protection against excessive pressure — Part 1: Safety valves AMENDMENT 1
• ISO 4126-2 Safety devices for protection against excessive pressure — Part 2: Bursting disc safety devices
• ISO 7010 Graphical symbols*， 2024-04-01 Update

BS EN IEC 61010-2-012:2022+A11:2022 history

• 2022 BS EN IEC 61010-2-012:2022+A11:2022 Safety requirements for electrical equipment for measurement, control and laboratory use - Particular requirements for climatic and environmental testing and other temperature conditioning equipment