SAE AMS4319-1994
ALUMINUM ALLOY@ ROLLED OR COLD FINISHED@ BARS AND RODS 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032- T651) Solution Heat Treated@ Stress- Relieved@ and Artificially Aged (UNS A94032)

Standard No.

SAE AMS4319-1994

Release Date

1994

Published By

SAE - SAE International

Status

Be replaced 2003-09

Replace By

SAE AMS4319A-1996

Latest

SAE AMS4319C-2019

Scope

Form: This specification covers an aluminium alloy in the form of bars and rods. Application: These products have been used typically for parts requiring wear resistance and moderate strength where limited formability is acceptable@ but usage is not limited to such applications. These products cover size range of 0.875 to 3.500 inches (22.22 to 88.90 mm) in nominal diameter or least distance between parallel sides.

SAE AMS4319-1994 history

• 2019 SAE AMS4319C-2019 Aluminum Alloy@ Rolled or Cold Finished@ Bars and Rods 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T651) Solution Heat Treated@ Stress Relieved@ Artificially Aged (UNS A94032)
• 2013 SAE AMS4319B-2013 Aluminum Alloy, Rolled or Cold Finished, Bars and Rods 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T651) Solution Heat Treated, Stress-Relieved, and Artificially Aged
• 2003 SAE AMS4319B-2003 Aluminum Alloy, Rolled or Cold Finished, Bars and Rods 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T651) Solution Heat Treated, Stress-Relieved, and Artificially Aged UNS A94032
• 1996 SAE AMS4319A-1996 Aluminum Alloy@ Rolled or Cold Finished@ Bars and Rods 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032- T651) Solution Heat Treated@ Stress- Relieved@ and Artificially Aged (UNS A94032)
• 1994 SAE AMS4319-1994 ALUMINUM ALLOY@ ROLLED OR COLD FINISHED@ BARS AND RODS 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032- T651) Solution Heat Treated@ Stress- Relieved@ and Artificially Aged (UNS A94032)