T 152-2010
Standard Method of Test for Air Content of Freshly Mixed Concrete by the Pressure Method

Standard No.

T 152-2010

Release Date

2010

Published By

AASHTO - American Association of State Highway and Transportation Officials

Status

Be replaced 2011-10

Replace By

T 152-2011

Latest

T/CIET 152-2023

Scope

This method covers determination of the air content of freshly mixed concrete from observation of the change in volume of concrete with a change in pressure. This method is intended for use with concretes and mortars made with relatively dense aggregates for which the aggregate correction factor can be satisfactorily determined by the technique described in Section 5. It is not applicable to concretes made with light-weight aggregates@ aircooled blast-furnace slag@ or aggregates of high porosity. In these cases@ T 196M/T 196 should be used. This test method is also not applicable to nonplastic concrete such as is commonly used in the manufacture of pipe and concrete masonry units. The text of this standard references notes and footnotes that provide explanatory information. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements for this standard. The values stated in inch-pound units are to be regarded as the standard. This standard does not purport to address all of the safety concerns@ if any@ associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Note A1.7 for a specific caution statement. Warning??Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure.

T 152-2010 history

• 2023 T/CIET 152-2023 General principles for evaluation of smart equipment
• 2019 T 152-2019 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Pressure Method
• 2017 T 152-2017 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Pressure Method
• 2016 T 152-2016 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Pressure Method
• 2013 T 152-2013 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Pressure Method
• 2012 T 152-2012 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Pressure Method
• 2011 T 152-2011 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Pressure Method
• 2010 T 152-2010 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Pressure Method
• 2005 T 152-2005 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Pressure Method
• 2001 T 152-2001 Standard Method of Test for Air Content of Freshly Mixed Concrete by the Pressure Method (HM-22; Part IIA; ASTM Designation: C 231-97)