ASTM D5900-17e1
Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)

Standard No.

ASTM D5900-17e1

Release Date

2017

Published By

American Society for Testing and Materials (ASTM)

Status

Be replaced

Replace By

ASTM D5900-20

Latest

ASTM D5900-23

Scope

1.1 This specification covers the chemical and physical quality specifications or requirements, or both, for Industry Reference Materials (IRMs) as cited in Practice D4678 and other standards. 1.2 IRMs, as evaluated and referenced in Practice D4678, are vitally important to conduct product, specification, and development testing in the rubber and carbon black industries. 1.3 Before a new lot of material can be accepted as an IRM, it must comply with the specifications prescribed in this specification. However, these specifications are only part of the requirements. Other requirements as given in Practice D4678 shall be met before a candidate material can be formally accepted as an IRM. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM D5900-17e1 Referenced Document

• ASTM D1278 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis*， 2020-06-01 Update
• ASTM D1416 
• ASTM D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
• ASTM D1519 Standard Test Methods for Rubber Chemicals—Determination of Melting Range*， 2023-09-01 Update
• ASTM D1646 Standard Test Method for RubberÐViscosity and Vulcanization Characteristics (Mooney Viscometer)
• ASTM D1747 Standard Test Method for Refractive Index of Viscous Materials
• ASTM D1951 
• ASTM D1959 
• ASTM D1960 
• ASTM D1965 
• ASTM D1980 
• ASTM D1982 Standard Test Method for Titer of Fatty Acids
• ASTM D1993 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption
• ASTM D2007 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay8212;Gel Absorption Chromatographic Method
• ASTM D2140 Standard Test Method for Carbon-Type Composition of Insulating Oils of Petroleum Origin
• ASTM D2161 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
• ASTM D2501 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils
• ASTM D280 Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments
• ASTM D287 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
• ASTM D3037 Test Methods for Carbon Black-Surface Area by Nitrogen Adsorption (Withdrawn 1999)
• ASTM D3157 Standard Test Method for Rubber from Natural Sources8212;Color
• ASTM D3194 Standard Test Method for Rubber From Natural Sources-Plasticity Retention Index (PRI)
• ASTM D3280 Standard Test Methods for Analysis of White Zinc Pigments*， 2020-06-01 Update
• ASTM D4004 Standard Test Methods for Rubber8212;Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
• ASTM D4075 Standard Test Methods for Compounding Materials-Flame Atomic Absorption Technique-Determination of Metals
• ASTM D4315 Standard Test Methods for Rubber Compounding Material—Zinc Oxide
• ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
• ASTM D4569 Standard Test Method for Rubber Chemicals-Determination of Acidity in Sulfur
• ASTM D4570 Standard Test Method for Rubber Chemicals-Determination of Particle Size of Sulfur by Sieving (Dry)
• ASTM D4571 Standard Test Methods for Rubber Chemicals-Determination of Volatile Material
• ASTM D4572 Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur
• ASTM D4574 Standard Test Methods for Rubber Chemicals-Determination of Ash Content
• ASTM D4578 Standard Test Methods for Rubber Chemicals8212;Determination of Percent Insoluble Sulfur by Solvent Extraction
• ASTM D4678 Standard Practice for Rubber8212;Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
• ASTM D4934 Standard Test Method for Rubber Compounding Materials 2-Benzothiazyl Sulfenamide Accelerators-Insolubles
• ASTM D4936 Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/ Titration
• ASTM D5289 Standard Test Method for Rubber Property8212;Vulcanization Using Rotorless Cure Meters
• ASTM D5668 Standard Test Methods for Rubber From Synthetic Sources-Volatile Matter
• ASTM D611 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
• ASTM D6738 Standard Test Method for Precipitated Silica—Volatile Content*， 2023-09-01 Update
• ASTM D6739 Standard Test Method for Silica—pH Value*， 2020-06-01 Update
• ASTM D6845 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area*， 2022-11-01 Update
• ASTM D6854 Standard Test Method for Silica&x2014;Oil Absorption Number (OAN)*， 2024-04-21 Update
• ASTM D88 Standard Test Method for Saybolt Viscosity
• ASTM D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup
• ASTM D97 Standard Test Method for Pour Point of Petroleum Products
• ISO 3262 Extenders for paints
• ISO 787 General methods of test for pigments and extenders — Part 9: Determination of pH value of an aqueous suspension*， 2019-02-26 Update

ASTM D5900-17e1 history

• 2023 ASTM D5900-23 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
• 2020 ASTM D5900-20 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
• 2017 ASTM D5900-17e1 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
• 2017 ASTM D5900-17 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
• 2016 ASTM D5900-16 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
• 2015 ASTM D5900-15c Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
• 2015 ASTM D5900-15b Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
• 2015 ASTM D5900-15a Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
• 2015 ASTM D5900-15 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM) This specification is under the jurisdiction of ASTM Committee D11 on Rubber and is the direct respo
• 2014 ASTM D5900-14a Standard Specification for Physical and Chemical Properties of Industry Reference Materials &40;IRM&41;
• 2014 ASTM D5900-14 Standard Specification for Physical and Chemical Properties of Industry Reference Materials &40;IRM&41;
• 2013 ASTM D5900-13 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
• 2012 ASTM D5900-12 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
• 2010 ASTM D5900-10a Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
• 2010 ASTM D5900-10 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
• 2008 ASTM D5900-08a Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
• 2008 ASTM D5900-08 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
• 2003 ASTM D5900-03 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
• 1998 ASTM D5900-98(2002) Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)
• 1998 ASTM D5900-98 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)