DS/EN 301:1994
Adhesives, phenolic and aminoplastic, for load-bearing timber structures: Classification and performance requirements

Standard No.
DS/EN 301:1994
Release Date
1994
Published By
Danish Standards Foundation
Status
 2013-08
Replace By
DS/EN 301 025-1 V1.5.2:2013
Latest
DS/EN 301 925 V1.4.1:2013
Scope
This European Standard establishes a classification for phenolic and aminoplastic polycondensation adhesives according to their suitability for use for load-bearing timber structures in defined climatic exposure conditions, and specifies performance requirements for such adhesives for the manufacture of load-bearing timber structures only. The performance requirements of this standard apply to the adhesive only, not to the structure. This standard is primarily intended for the use of manufacturers of adhesives and of adhesively bonded timber structures to assess or control the quality of adhesives. This standard only specifies the performance of an adhesive for use in an environment corresponding to the defined conditions. An adhesive meeting the requirements of this standard for its type will perform satisfactorily in a load-bearing structure, provided that the bonding process has been carried out correctly.

DS/EN 301:1994 history

  • 2013 DS/EN 301 925 V1.4.1:2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); Radiotelephone transmitters and receivers for the maritime mobile service operating in VHF bands; Technical characteristics and methods of measurement
  • 2013 DS/EN 301 908-4 V6.2.1:2013 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 4: CDMA Multi-Carrier (cdma2000) User Equipment (UE)
  • 2013 DS/EN 301 908-3 V6.2.1:2013 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS)
  • 2013 DS/EN 301 908-20 V6.2.1:2013 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 20: OFDMA TDD WMAN (Mobile WiMAX) TDD Base Stations (BS)
  • 2013 DS/EN 301 908-2 V6.2.1:2013 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)
  • 2013 DS/EN 301 908-2 V5.4.1:2013 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 2: CDMA Direct Spread (UTRA FDD) User Equipment (UE)
  • 2013 DS/EN 301 908-19 V6.2.1:2013 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 19: OFDMA TDD WMAN (Mobile WiMAX) TDD User Equipment (UE)
  • 2013 DS/EN 301 908-14 V6.2.1:2013 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 14: Evolved Universal Terrestrial Radio Access (E-UTRA) Base Stations (BS)
  • 2013 DS/EN 301 908-13 V6.2.1:2013 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 13: Evolved Universal Terrestrial Radio Access (E-UTRA) User Equipment (UE)
  • 2013 DS/EN 301 908-1 V6.2.1:2013 IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 1: Introduction and common requirements
  • 2013 DS/EN 301 893 V1.7.1:2013 Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive
  • 2013 DS/EN 301 605 V1.1.1:2013 Environmental Engineering (EE); Earthing and bonding of 400 VDC data and telecom (ICT) equipment
  • 2013 DS/EN 301 559-2 V1.1.2:2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI)operating in the frequency range 2 483,5 MHz to 2 500 MHz; Part 2: Harmonized EN covering the essential requirements of ar
  • 2013 DS/EN 301 559-1 V1.1.2:2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Low Power Active Medical Implants (LP-AMI)operating in the frequency range 2 483,5 MHz to 2 500 MHz; Part 1: Technical characteristics and test methods
  • 2013 DS/EN 301 489-50 V1.2.1:2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;Part 50: Specific conditions for Cellular Communication Base Station (BS), repeater and ancillary equipment
  • 2013 DS/EN 301 489-34 V1.4.1:2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;Part 34: Specific conditions for External Power Supply (EPS) for mobile phones
  • 2013 DS/EN 301 489-34 V1.3.1:2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;Part 34: Specific conditions for External Power Supply (EPS) for mobile phones
  • 2013 DS/EN 301 489-3 V1.6.1:2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246 GHz
  • 2013 DS/EN 301 473 V1.4.1:2013 Satellite Earth Stations and Systems (SES); Aircraft Earth Stations (AES) operating below 3 GHz under the Aeronautical Mobile Satellite Service (AMSS)/ Mobile Satellite Service (MSS) and/or the Aeronautical Mobile Satellite on Route Service (AMS(R)S)/ Mob
  • 2013 DS/EN 301 444 V1.2.2:2013 Satellite Earth Stations and Systems (SES); Harmonized EN for Land Mobile Earth Stations (LMES) operating in the 1,5 GHz and 1,6 GHz bandsproviding voice and/or data communications covering essential requirements of article 3.2 of the R&TTE directive
  • 2013 DS/EN 301 390 V1.3.1:2013 Fixed Radio Systems; Point-to-point and Multipoint Systems; Unwanted emissions in the spurious domain and receiver immunity limits at equipment/antenna port of Digital Fixed Radio Systems
  • 2013 DS/EN 301 033 V1.4.1:2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); Technical characteristics and methods of measurement for shipborne watchkeeping receivers for reception of Digital Selective Calling (DSC) in the maritime MF, MF/HF and VHF bands
  • 2013 DS/EN 301 025-3 V1.5.1:2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC); Part 3: Harmonized EN covering the essential requirements of ar
  • 2013 DS/EN 301 025-2 V1.5.1:2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC); Part 2: Harmonized EN covering the essential requirements of ar
  • 2013 DS/EN 301 025-1 V1.5.2:2013 Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC); Part 1: Technical characteristics and methods of measurement Eu
  • 1994 DS/EN 301:1994 Adhesives, phenolic and aminoplastic, for load-bearing timber structures: Classification and performance requirements



Copyright ©2024 All Rights Reserved