IEC 60034-3:2005
Rotating electrical machines – Part 3: Specific requirements for cylindrical rotor synchronous machines (Edition 5.0;: 1988)
- Standard No.
- IEC 60034-3:2005
- Release Date
- 2005
- Published By
- IEC - International Electrotechnical Commission
- Status
- 2007-11
- Replace By
- IEC 60034-3:2007
- Latest
- IEC 60034-3:2020
- Scope
- This part of IEC 60034 applies to three-phase cylindrical rotor synchronous machines@ having rated outputs of 10 MVA (or MW) and above. It supplements the basic requirements for rotating machines given in IEC 60034-1. The special requirements of machines continuously fed by inverters are not covered by this standard.Common requirements for all cylindrical rotor machines are prescribed together with specific requirements for air@ for hydrogen or for liquid cooled cylindrical rotor synchronous machines.This part of IEC 60034 also gives the precautions to be taken when using hydrogen cooled machines including?C rotating exciters driven by cylindrical rotor type machines;?C auxiliary equipment needed for operating the machines;?C parts of the building where hydrogen might accumulate.
IEC 60034-3:2005 history
- 2020 IEC 60034-3:2020 Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators
- 2007 IEC 60034-3:2007 Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines
- 2005 IEC 60034-3:2005 Rotating electrical machines – Part 3: Specific requirements for cylindrical rotor synchronous machines (Edition 5.0;: 1988)
- 1970 IEC 60034-3:1988/COR1:1997 Corrigendum 1 - Rotating electrical machines - Part 3: Specific requirements for turbine-type synchronous machines
- 1988 IEC 60034-3:1988 Rotating electrical machines; part 3: ratings and characteristics of three-phase, 50 Hz turbine-type machines
- 1968 IEC 60034-3:1968 Machines électriques tournantes Trolsléme Partie: Valeurs nominales et caractéristinues des turbo-machines triphasés à 50 Hz (Edition 3.0)
- 1962 IEC 60034-3:1962 Machines électriques tournantes (à l'exclusion des machines pour véhicules de traction) Trolsléme Partie: Valeurs nominales et caractéristinues des turbo-altenateurs triphasés à 50 Hz (Edition 2.0)
- 1958 IEC 60034-3:1958 Recommandalions pour l'etablissement de normes préféréntielles Pour turbo-alternateurs triphases 3 000 tr/min - 50 Hz Publication No 34 - 5me edition 3ma Partie (Edition 1.0)
