UL 87A BULLETIN-2014 UL Outline of Investigation for Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85) (COMMENTS DUE: MAY 26@ 2014)
These requirements apply to power-operated dispensing devices@ rated 600 V ac or less@ for use with motor fuels. Motor fuels@ as defined by these requirements@ include one or more of the fuels described in 1.2. Dispensing devices covered by these requirements are intended for use with one or more of the following: a) Gasoline formulated in accordance with the Standard Specification for Automotive Spark- Ignition Fuel@ ASTM D4814; b) Gasoline/ethanol blends with nominal ethanol concentrations up to 25 percent ethanol (E25)@ consisting of gasoline formulated in accordance with the Standard Specification for Automotive Spark-Ignition Fuel@ ASTM D4814@ when blended with denatured fuel ethanol formulated to be consistent with the Standard Specification for Denatured Fuel Ethanol for Blending With Gasoline for Use as Automotive Spark-Ignition Engine Fuel@ ASTM D4806; or c) Gasoline/ethanol blends with nominal ethanol concentrations above 25 percent formulated in accordance with the Standard Specifications in item (b) or formulated in accordance with the Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines@ ASTM D5798@ as applicable. Requirements for the installation and use of dispensing devices are included in the Code for Motor Fuel Dispensing Facilities and Repair Garages@ ANSI/NFPA 30A@ and the National Electrical Code@ ANSI/NFPA 70. These requirements apply to wiring methods used to install or interconnect such control equipment when the equipment is located directly on or within the housing of the dispensing device. These requirements do not apply to control equipment that may authorize@ monitor@ or interrupt operation of a power-operated dispensing device@ nor other auxiliary equipment. These products would be covered under the Standard for Control Equipment for Use With Flammable Liquid Dispensing Devices@ UL 1238. These requirements do not cover dispensing devices for use with diesel fuel@ biodiesel fuel@ diesel/biodiesel fuel blends@ fuel oil@ or kerosene@ which are covered in the Outline of Investigation for Power Operated Dispensing Devices for Diesel Fuel@ Biodiesel@ Diesel/Biodiesel Blends With Nominal Biodiesel Concentrations Up To 20 Percent (B20)@ Kerosene and Fuel Oil@ UL 87B. These requirements do not cover dispensing devices for use with LP-Gas@ which are covered under the Standard for Power-Operated Dispensing Devices for LP-Gas@ UL 495.
UL 87A BULLETIN-2014 history
1970UL 87A-2020 UL Standard for Safety Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0-C E85)
2019UL 87A BULLETIN-2019 UL Standard for Safety Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85) (COMMENTS DUE: MAY 6@ 2019)
2018UL 87A BULLETIN-2018 UL Outline of Investigation for Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85) (COMMENTS DUE: APRIL 30@ 2018)
2017UL 87A BULLETIN-2017 UL Outline of Investigation for Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85) (COMMENTS DUE: JULY 31@ 2017)
2016UL 87A BULLETIN-2016 UL Outline of Investigation for Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85) (COMMENTS DUE: FEBRUARY 22@ 2016)
2015UL 87A BULLETIN-2015 UL Outline of Investigation for Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85) (COMMENTS DUE: DECEMBER 18@ 2015)
2015UL 87A-2015 UL Standard for Safety Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 �C E85) (First Edition; Reprint with revisions through and including June 27@ 2018)
2014UL 87A BULLETIN-2014 UL Outline of Investigation for Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 – E85) (COMMENTS DUE: MAY 26@ 2014)
2010UL 87A BULLETIN-2010 UL Standard for Safety OUTLINE OF INVESTIGATION FOR POWER-OPERATED DISPENSING DEVICES FOR GASOLINE AND GASOLINE/ETHANOL BLENDS WITH NOMINAL ETHANOL CONCENTRATIONS UP TO 85 PERCENT (E0 – E85)
2009UL 87A BULLETIN-2009 UL Standard for Safety Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations Up to 85 Percent (E0 - E85)
2007UL 87A BULLETIN-2007 OUTLINE OF INVESTIGATION FOR POWER-OPERATED DISPENSING DEVICES FOR GASOLINE/ETHANOL BLENDS WITH ETHANOL CONTENT GREATER THAN 15 PERCENT