ASTM D8164-18
Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing
- Standard No.
- ASTM D8164-18
- Release Date
- 2018
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D8164-18a
- Latest
- ASTM D8164-21
- Scope
- 1.1 This guide establishes criteria for the various parameters needed to define a digital contact thermometer (DCT) suitable for measuring temperature in the test methods utilized by Committee D02. The DCT criteria are based on the design and sensing characteristics of the liquid-in-glass thermometers that have been used successfully in Committee D02 test methods. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D8164-18 Referenced Document
- ASTM D2162 Standard Test Method for Basic Calibration of Master Viscometers and Viscosity Oil Standards
- ASTM D2386 Standard Test Method for Freezing Point of Aviation Fuels
- ASTM D2500 Standard Test Method for Cloud Point of Petroleum Products
- ASTM D2532 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
- ASTM D2983 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer
- ASTM D3829 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
- ASTM D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity)
- ASTM D4539 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
- ASTM D4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
- ASTM D5853 Standard Test Method for Pour Point of Crude Oils
- ASTM D6371 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels
- ASTM D6821 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer*， 2020-11-01 Update
- ASTM D6896 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature*， 2020-11-01 Update
- ASTM D7279 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer*， 2024-04-21 Update
- ASTM D7962 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift*， 2021-05-01 Update
- ASTM D97 Standard Test Method for Pour Point of Petroleum Products
- ASTM E1 Standard Specification for ASTM Thermometers
- ASTM E1750 Standard Guide for Use of Water Triple Point Cells
- ASTM E2251 Standard Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids*， 2021-12-01 Update
- ASTM E2877 Standard Guide for Digital Contact Thermometers*， 2024-04-21 Update
- ASTM E563 Standard Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature
- ASTM E644 Standard Test Methods for Testing Industrial Resistance Thermometers
- ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories [Standard in French]
ASTM D8164-18 history
- 2021 ASTM D8164-21 Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing
- 2019 ASTM D8164-19 Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing
- 2018 ASTM D8164-18a Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing
- 2018 ASTM D8164-18 Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing
