Form This specification covers an aluminum alloy in the form of rolled or cold-finished bars@ rods@ and wire and of flash welded rings and stock for flash welded rings. This specification covers rounds 8 inches (203 mm) and under in specified diameter@ and square@ rectangular@ hexagonal@ and octagonal bars 50 square inches (322 cm2) and under in cross-sectional area and 8 inches (203 mm) and under in least distance between parallel sides@ and flash welded rings 8 inches (203 mm) and under in radial thickness (See 8.4). Application These products have been used typically for parts requiring moderate strength where limited formability is acceptable@ but usage is not limited to such applications.
SAE AMS4117K-2015 history
2020SAE AMS4117L-2020 Aluminum Alloy, Rolled or Cold Finished, Bars, Rods, and Wire and Flash Welded Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6, -T651)
2015SAE AMS4117K-2015 Aluminum Alloy@ Rolled or Cold Finished Bars@ Rods@ and Wire and Flash Welded Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6@ -T651) (UNS A96061)
2009SAE AMS4117J-2009 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire and Flash Welded Rings 1.0Mg 0.60Si 0.28Cu 0.20Cr (6061; -T6, -T651) Solution and Precipitation Heat Treated
2006SAE AMS4117H-2006 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire and Flash Welded Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061; -T6, -T651) Solution and Precipitation Heat Treated
2001SAE AMS4117H-2001 Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire and Flash Welded Rings 1.0Mg 0.60Si 0.28Cu 0.20Cr Solution and Precipitation Heat Treated
1994SAE AMS4117G-1994 Aluminum Alloy@ Rolled or Cold Finished Bars@ Rods@ and Wire and Flash Welded Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061 (UNS A96061)
1989SAE AMS4117F-1989 ALUMINUM ALLOY BARS, RODS, AND HIRE, ROLLED OR COLD FINISHED AND FLASH WELDED RINGS 1.0Mg - 0.60Si - 0.28CU - 0.20Cr (6061; -T6, -T651) Solution and Precipitation Heat Treated