This document covers the tests to be performed on all J2602-1 defined Master and Slave nodes. Tests described in this document will ensure a minimum standard level of performance to which all compatible ECUs and media shall be designed. This will assure full serial data communication among all connected devices regardless of supplier. The goal of SAE J2602-2 is to improve the interoperability and interchangeability of LIN devices within a network by verifying the devices pass a minimum set of tests. To allow for easy cross-reference@ this document is arranged such that the conformance test for a given section in J2602-1 is in the same section in J2602-2. This document is to be referenced by the particular vehicle OEM component technical specification that describes any given ECU in which the LIN data link controller and physical layer interface is located. Primarily@ the performance of the physical layer is specified in this document. ECU environmental and other requirements@ when provided in the component technical specification@ shall supercede the requirements of this document. The intended audience includes@ but is not limited to@ ECU suppliers@ LIN controller suppliers@ LIN transceiver suppliers@ component release engineers and vehicle system engineers.
SAE J2602-2-2005 history
1970SAE J2602-2-2021 LIN Network for Vehicle Applications Conformance Test
2012SAE J2602-2-2012 LIN Network for Vehicle Applications Conformance Test
2005SAE J2602-2-2005 LIN Network for Vehicle Applications Conformance Test