ISO 4359:2022
Flow measurement structures — Rectangular, trapezoidal and U-shaped flumes

Standard No.
ISO 4359:2022
Release Date
2022
Published By
International Organization for Standardization (ISO)
Latest
ISO 4359:2022
Scope
This document specifies methods for the measurement of flow in rivers and artificial channels under steady or slowly varying flow conditions, using certain types of critical-depth flumes (also known as “standing-wave flumes”). A wide variety of flumes has been developed, but only those critical-depth flumes which have received general acceptance after adequate research and field testing, and which therefore do not require in situ calibration, are considered herein. The flow conditions considered are uniquely dependent on the upstream head, i.e. subcritical flow must exist upstream of the flume, after which the flow accelerates through the contraction and passes through its critical depth (see Figure 1). The water level downstream of the structure is low enough to have no influence upon its performance. This document is applicable to three commonly used types of flumes, covering a wide range of applications, namely rectangular-throated, trapezoidal-throated and U-throated. The hydraulic theory behind this document was presented in Reference [7]. This document is not applicable to a form of flume referred to in the literature (sometimes called a “Venturi” flume) in which the flow remains subcritical throughout. NOTE The Venturi form of flume is based on the same principle as a Venturi meter used within a closed conduit system and relies upon gauging the head at two locations and the application of Bernoulli’s energy formula.

ISO 4359:2022 Referenced Document

  • ISO 772 Hydrometry — Vocabulary and symbols

ISO 4359:2022 history

  • 2022 ISO 4359:2022 Flow measurement structures — Rectangular, trapezoidal and U-shaped flumes
  • 2017 ISO 4359:2013/Amd 1:2017 Flow measurement structures - Rectangular, trapezoidal and U-shaped flumes; Amendment 1
  • 2013 ISO 4359:2013 Flow measurement structures - Rectangular, trapezoidal and U-shaped flumes
  • 1999 ISO 4359:1983/Cor 1:1999 Liquid flow measurement in open channels - Rectangular, trapezoidal and U-shaped flumes; Technical Corrigendum 1
  • 1983 ISO 4359:1983 Liquid flow measurement in open channels; Rectangular, trapezoidal and U-shaped flumes
Flow measurement structures — Rectangular, trapezoidal and U-shaped flumes



Copyright ©2024 All Rights Reserved