UL 1047-2010
UL Standard for Safety Isolated Power Systems Equipment (Fifth Edition)

Standard No.
UL 1047-2010
Release Date
2010
Published By
Underwriters Laboratories (UL)
Status
 2015-10
Replace By
UL 1047-2015
Latest
UL 1047-2020
Scope
These requirements cover isolated power systems equipment rated 600 Vac or less@ intended for installation and use in nonhazardous areas in health care facilities in accordance with the requirements in Article 517 of the National Electrical Code@ NFPA 70@ and in the Standard for Health Care Facilities@ NFPA 99. These requirements cover isolated power centers@ either cord-connected or permanently wired@ consisting of a distribution panel that incorporates an isolation transformer@ one or more isolated ungrounded secondary circuits terminating in integrally mounted grounding-type receptacles@ a reference grounding bus bar@ and line isolation monitor. Isolated power centers may have provision for connection of grounding conductors to remote grounding jacks@ the room bonding points@ and patient equipment grounding points. A permanently wired isolated power center may also have provision for connection to remote receptacles or indicators. These requirements cover convertible system units that facilitate a temporary conversion of the power supply for a power center from a grounded supply to an isolated supply. These requirements cover isolated power panelboards that incorporate the same features as permanently wired isolated power centers except that: a) They may be supplied from remote isolation transformers@ and b) The secondary isolated circuits are intended to be connected by conduit to remotely located receptacles. These requirements cover wall modular units containing isolated power systems. These requirements cover cord-connected isolated power centers@ and panels intended to supply x-ray equipment only.

UL 1047-2010 history

  • 1970 UL 1047-2020 Isolated power systems equipment
  • 2015 UL 1047 BULLETIN-2015 UL Standard for Safety Isolated Power Systems Equipment (COMMENTS DUE: September 21@ 2015)
  • 2015 UL 1047-2015 UL Standard for Safety Isolated Power Systems Equipment (Sixth Edition)
  • 2010 UL 1047-2010 UL Standard for Safety Isolated Power Systems Equipment (Fifth Edition)
  • 2009 UL 1047 BULLETIN-2009 UL Standard for Safety Isolated Power Systems Equipment (COMMENTS DUE: March 02@ 2009)
  • 2008 UL 1047 BULLETIN-2008 UL Standard for Safety Isolated Power Systems Equipment (COMMENTS DUE: January 08@ 2009)
  • 2007 UL 1047 BULLETIN-2007 UL Standard for Safety Isolated Power Systems Equipment ALL COMMENTS DUE: October 29, 2007
  • 2003 UL 1047 BULLETINS-2003 UL Standard for Safety Isolated Power Systems Equipment (07/07/2003 (8p); 03/05/2003 (10p))
  • 2003 UL 1047-2003 UL Standard for Safety Isolated Power Systems Equipment (Fourth Edition)
  • 1995 UL 1047-1995 UL Standard for Safety Isolated Power Systems Equipment (Third Edition; Reprint with Revisions Through and Including June 02@ 2000)
  • 1990 UL 1047-1990 Isolated power systems equipment



Copyright ©2024 All Rights Reserved