- Standard No.
- CAN/ULC-S609:2016
- Release Date
- 2016
- Published By
- SCC
- Latest
-
CAN/ULC-S609:2016
- Replace By
-
CAN/ULC 609:2022
- Replace
-
CAN/ULC-S609-M89
- Scope
- 1.1 These requirements cover the design and construction of Type L vents intended for the venting of flue
gases having temperatures not exceeding 300 °C, from fuel-burning appliances certified for use with
Type L vents. They may also be used where Type B gas vents are used. They are intended for installation
in buildings to provide a passageway for conveying flue gases to the outer air from the above-described
class of appliances.
1.2 These requirements also cover the design and construction of Type PL vents for use in residential
dwellings for the venting to the outdoors of the products of combustion from certified automatic
particulate-fuelled space heaters.
1.3 Vents covered by this Standard are intended for installation in accordance with the National Building
Code of Canada, CSA B365 – Installation Code for Solid-Fuel Burning Appliances and Equipment,
CSA B139.2 – Installation Code for Oil-Burning Equipment for Residential and Small Commercial
Buildings, and CSA B149.1 – Natural Gas and Propane Installation Code, as applicable, or the acts or
regulations of the authority having jurisdiction.
CAN/ULC-S609:2016 history
CAN/ULC-S609:2016 STANDARD FOR LOW TEMPERATURE VENTS TYPE L AND PL was changed to CAN/ULC 609:2022 STANDARD FOR LOW TEMPERATURE VENTS TYPE L AND PL.