UL 61010-1 (ND)-2004 PDF

Standard No.: UL 61010-1 (ND)-2004
Release Date: 2004
Published By: Underwriters Laboratories (UL)
Status: Be replaced 2012-05
Replace By: UL 61010-1 BULLETINS-2004
Latest: UL 61010-1-2023

Scope: Preface This document provides a single listing of the technical National Differences included in the UL adoption of the corresponding IEC standard. In its IEC-based standards@ UL uses the notations indicated below to identify national difference type@ and these types are additionally noted in this document. The standard may not use all types of these deviations. D1 - These are deviations which are based on basic safety principles and requirements@ elimination of which would compromise safety for U.S. consumers and users of products. D2 - These are deviations based on safety practices. These are deviations for IEC requirements that may be acceptable@ but adopting the IEC requirements would require considerable retesting or redesign on the manufacturer's part. DC - These are deviations based on the component standards and will not be deleted until a particular component standard is harmonized with the IEC component standard. DE - These are deviations based on editorial comments or corrections. DR - These are deviations based on the national regulatory requirements. Each national difference contains a description of what the national difference entails. Typically one of the following words is used to explain how the text of the national difference is to be applied to the base IEC text: Addition / Add - An addition entails adding a complete new numbered clause@ subclause@ table@ figure@ or annex. Addition is not meant to include adding select words to the base IEC text. Deletion / Delete - A deletion entails complete deletion of an entire numbered clause@ subclause@ table@ figure@ or annex without any replacement text. Modification / Modify - A modification is an altering of the existing base IEC text such as the addition@ replacement or deletion of certain words or the replacement of an entire clause@ subclause@ table@ figure@ or annex of the base IEC text.

UL 61010-1 (ND)-2004 history

2023 UL 61010-1-2023 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements
1970 UL 61010-1-2019 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
2018 UL 61010-1 BULLETIN-2018 UL Standard for Safety Electrical Equipment For Measurement@ Control@ and Laboratory Use; Part 1: General Requirements (COMMENTS DUE: JANUARY 26@ 2018)
2015 UL 61010-1 BULLETIN-2015 UL Standard for Safety Electrical Equipment For Measurement@ Control@ and Laboratory Use; Part 1: General Requirements (COMMENTS DUE: JANUARY 11@ 2016)
2014 UL 61010-1 BULLETIN-2014 UL Standard for Safety Electrical Equipment For Measurement@ Control@ and Laboratory Use; Part 1: General Requirements (COMMENTS DUE: DECEMBER 15@ 2014)
2012 UL 61010-1 BULLETIN-2012 UL Standard for Safety Electrical Equipment For Measurement@ Control@ and Laboratory Use; Part 1: General Requirements
2012 UL 61010-1 (ND)-2012 National Differences For UL 61010-1 Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements (Edition 3; Reprint with revisions through and including July 15, 2015)
2012 UL 61010-1-2012 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
2011 UL 61010-1 BULLETIN-2011 UL Standard for Safety Electrical Equipment For Measurement@ Control@ and Laboratory Use; Part 1: General Requirements (COMMENTS DUE: September 26@ 2011)
2010 UL 61010-1 CRD-2010 UL Standard for Safety Electrical Equipment For Measurement@ Control@ and Laboratory Use; Part 1: General Requirements - Section / Paragraph Reference: 5.4.1 Subject: Documentation provided on electronic media (Edition 2: July 12@ 2004)
2010 UL 61010-1 BULLETIN-2010 UL Standard for Safety Electrical Equipment For Measurement@ Control@ and Laboratory Use; Part 1: General Requirements
2008 UL 61010-1 BULLETIN-2008 UL Standard for Safety Electrical Equipment For Measurement@ Control@ and Laboratory Use; Part 1: General Requirements (COMMENTS DUE: June 09@ 2008)
2007 UL 61010-1 BULLETIN-2007 UL Standard for Safety Electrical Equipment For Measurement, Control, and Laboratory Use; Part 1: General Requirements ALL COMMENTS DUE: November 12, 2007
2006 UL 61010-1 BULLETINS-2006 UL Standard for Safety Electrical Equipment For Measurement@ Control@ and Laboratory Use; Part 1: General Requirements (09/15/2006 (68p); 08/18/2006 (68p); 05/12/2006 (4p); 05/03/2006 (68p))
2005 UL 61010-1 BULLETINS-2005 07/27/2005 (4p)
2005 UL 61010-1 BULLETIN-2005 UL Standard for Safety Electrical Equipment For Measurement@ Control@ and Laboratory Use; Part 1: General Requirements
2004 UL 61010-1 BULLETINS-2004 UL Standard for Safety Electrical Equipment For Measurement@ Control@ and Laboratory Use; Part 1: General Requirements (07/23/2004 (2p); 07/12/2004 (2p))
2004 UL 61010-1 (ND)-2004 National Differences For UL 61010-1 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 1: General Requirements (Second Edition; Reprint with Revisions Through and Including July 12@ 2013)
2004 UL 61010-1-2004 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements

UL 61010-1 (ND)-2004National Differences For UL 61010-1 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 1: General Requirements (Second Edition; Reprint with Revisions Through and Including July 12@ 2013)

UL 61010-1 (ND)-2004 history

UL 61010-1 (ND)-2004
National Differences For UL 61010-1 Safety Requirements for Electrical Equipment for Measurement@ Control@ and Laboratory Use - Part 1: General Requirements (Second Edition; Reprint with Revisions Through and Including July 12@ 2013)