ASTM D6088-06(2016)
Standard Practice for Installation of Geocomposite Pavement Drains
- Standard No.
- ASTM D6088-06(2016)
- Release Date
- 2016
- Published By
- American Society for Testing and Materials (ASTM)
- Status
- Replace By
- ASTM D6088-06(2022)
- Latest
- ASTM D6088-06(2022)
- Scope
- 1.1 This practice covers recommendations and identifies pertinent areas of consideration for the installation of buried geocomposite drains used for highway edgedrains, underdrains, or other pavement drainage applications meeting the requirements of Specification D7001. These recommendations are intended as guidelines for developing a satisfactory construction and installation method to minimize installationcaused deformation or damage and to provide long-term performance of these products. It is also intended as a guideline for ensuring a stable underground environment for these materials under a wide range of service conditions. Because of the numerous and diverse product designs available and the inherent variability of natural ground conditions, achieving satisfactory performance of any one product may require review by the engineer and modification to provisions contained herein to meet specific project requirements. 1.2 The scope of this practice necessarily excludes product performance criteria such as compressibility in any plane, flow capacity, inlet capacity, or geotextile selection and use. It is, therefore, incumbent upon the product manufacturer, specifier, and project engineer to verify that the product specified for an intended application, when installed according to procedures outlined in this practice, will provide satisfactory long term performance according to criteria established by the owner for that application. A commentary of product performance and installation factors important in achieving a satisfactory installation is included in Appendix X1. 1.3 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM D6088-06(2016) Referenced Document
- ASTM D2321 Recommended Practice for Underground Installation Of Flexible Thermoplastic Sewer Pipe
- ASTM D2487 Standard Test Method for Classification Of Soils For Engineering Purposes
- ASTM D3839 Standard Practice for Underground Installation of "Fiberglass" (Glass-Fiber- Reinforced Thermosetting-Resin) Pipe
- ASTM D420 Standard Guide to Site Characterization for Engineering Design and Construction Purposes
- ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils*， 2017-06-01 Update
- ASTM D4439 Standard Terminology for Geosynthetics*， 2024-02-01 Update
- ASTM D653 Standard Terminology Relating to Soil, Rock, and Contained Fluids
- ASTM D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))*， 2024-04-21 Update
- ASTM D7001 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications*， 2020-01-01 Update
- ASTM D8 Standard Terminology Relating to Materials for Roads and Pavements
- ASTM F412 Standard Terminology Relating to Plastic Piping Systems*， 2023-07-20 Update
ASTM D6088-06(2016) history
- 2022 ASTM D6088-06(2022) Standard Practice for Installation of Geocomposite Pavement Drains
- 2016 ASTM D6088-06(2016) Standard Practice for Installation of Geocomposite Pavement Drains
- 2006 ASTM D6088-06(2011) Standard Practice for Installation of Geocomposite Pavement Drains
- 2006 ASTM D6088-06 Standard Practice for Installation of Geocomposite Pavement Drains
- 1997 ASTM D6088-97(2002) Standard Practice for Installation of Geocomposite Pavement Drains
- 1997 ASTM D6088-97 Standard Practice for Installation of Geocomposite Pavement Drains
